It turns out that mine have pins that would prevent the saw method. They are smooth tapered pins about 1/4" long. All they do is set the place. I ended up using outdoor glue to hold it in place. BillR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mitch Haley Sent: Tuesday, January 10, 2006 6:01 PM To: Mercedes Discussion List Subject: Re: [MBZ] Emblem flapping in the breeze
Jim Cathey wrote: > > For the SDL I just carefully pried it all the way off, cleaned the > area with alcohol, and used weatherstrip cement to glue it back on > over the old glue shadow. Some guys like to saw it off with a loop of fishing line behind the badge. Almost impossible to bend or break the badge that way. _______________________________________ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
