Did not swap the pbu over? Sent from my iPhone
> On Feb 2, 2014, at 2:12 PM, "G. M. Brown" <g_010...@hotmail.com> wrote: > > I'm wondering if any of you on the list have had this problem and what you > may have done to resolve it. > The fan speeds in my '84 300D went sorta' south quite awhile ago. What I > mean by this is that the high speed position on the PBU provides a fan speed > very slightly faster than the low speed positon on the PBU. The fan speeds > in my '85 300TD are all OK, so I exchanged the following units from the '85 > 300TD to the '84 300D: PBU, Temperature Control unit (behind the glovebox), > and Fan Speed Control unit (behind the glovebox), and conductive grease > lubricated all the connections including those to the fan itself. I had also > measured the resistances of the individual fan speed resistors in the engine > compartment and those in the 300D appear similar to those in the TD. What's > up? > TIA. > > G. M. Brown > Brevard, NC > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com