Now you'll be able to fly!
Bob Rentfro
'77 300D 147K
Litchfield Park, AZ
----- Original Message -----
From: "Hans Neureiter" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" <[EMAIL PROTECTED]>
Sent: Thursday, January 12, 2006 9:35 AM
Subject: Re: [MBZ] button under gas pedal
Found the culprit. There was a rotten piece of rubber cover for the
switch.
Ripped it out and it works now, even though the pedal just barely pushes
the
button.
On 1/12/06, Hans Neureiter <[EMAIL PROTECTED]> wrote:
Thanks all. Just wanted to make sure I was looking at this the right way.
I'll start digging.
On 1/12/06, Jim Cathey <[EMAIL PROTECTED]> wrote:
>
> > Whit the pedal to the floor, there is still a gap between the
> > pedal arm and the switch.
>
> Something is out of whack. Pull all the carpeting and see
> if it makes more sense. The bottom of the pedal where the
> rod goes in should contact the top of the switch. If it
> doesn't, either somebody has the wrong pedal in there, or
> the bottom pivot rusted off and it's been put back in the
> wrong place, somebody moved the switch, or the linkage has
> been moved somehow.
>
> -- Jim
>
>
> _______________________________________
> http://www.striplin.net
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://striplin.net/mailman/listinfo/mercedes_striplin.net
>
--
Hans Neureiter, Houston, TX
'82 300SD, '95 E300D
--
Hans Neureiter, Houston, TX
'82 300SD, '95 E300D
_______________________________________
http://www.striplin.net
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://striplin.net/mailman/listinfo/mercedes_striplin.net
