Yes. Dead easy. Just be careful about corrosion: aluminium and salt are a bad combo, so you may find that you have stripped threads, esp the bleed valve. Might want to give everything a good soaking with Liquid Wrench in case it helps.
Also, under NO CIRCUMSTANCES should you remove the control lever from the valve shaft. Disconnect the lever from the linkage, but leave it attached to the shaft or you'll disturb the designed relationship between the position of the lever and the control disc inside the valve. On 4/23/14, Andrew Strasfogel wrote: > >That's good to know. Is it easy to r/r the sls valve as well? _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com All posts are the result of individual contributors and as such, those individuals are responsible for the content of the post. The list owner has no control over the content of the messages of each contributor.