I believe the gasket is press fit into a channel. Sounds like yours has come apart, time for a new gasket.
Max Dillon, Charleston SC On May 23, 2014 1:46 PM, "Angelo Giaimo" <michaelangel...@gmail.com> wrote: > Hi, > > The sunroof gasket on my 1990 350 Rodbender SDL keeps pulling away from the > insert in the roof gets jammed in the sliding roof panel when it gets > lowered from vent to closed position. Usually in the drivers rear corner. > I can hold the gasket in place with something thin and gradually close the > roof. > > Does the gasket shrink over time (and then pull away from the corners?) or > should it be glued in place, or just replaced? Alternatively, I can just > keep it closed, but I like the open air in the summertime! > > Thanks! > > Angelo Giaimo > 1990 W126 > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > All posts are the result of individual contributors and as such, those > individuals are responsible for the content of the post. The list owner > has no control over the content of the messages of each contributor. > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com All posts are the result of individual contributors and as such, those individuals are responsible for the content of the post. The list owner has no control over the content of the messages of each contributor.
