Max Dillon
Charleston SC
'87 300TD
'95 E300

On August 6, 2017 6:52:21 PM EDT, "Kaleb C. Striplin via Mercedes" 
<> wrote:
>So the axle I had on hand was too short so it did not come out of a
>124, I think it was a 126 axle. So after remembering the tricks to the
>job I was able to pull an axle out of the rusty e300 in about 10
>minutes. Got it installed in the car. Next up was installing the rear
>exhaust I pulled out of the other car. For some reason it is hanging
>slightly too high. Just enough to cause annoying rattles and it is
>contacting the diff end of the axle and the bolt heads are hitting it
>causing a hell of a noise. I jacked around with it prying it around to
>no avail. I had enough and gave up for the day. Tomorrow I will
>probably drop the exhaust down again and see if bending the rear and
>middle mounting hooks up slightly will drop the exhaust down. It only
>needs to be down probably a quarter of an inch. 
>Sent from my iPhone
>To search list archives
>To Unsubscribe or change delivery options go to:

To search list archives

To Unsubscribe or change delivery options go to:

  • [MBZ] E300 update Kaleb C. Striplin via Mercedes
    • Re: [MBZ] E300 update Max Dillon via Mercedes

Reply via email to