I used heavy coat hanger wire bent into a “T” for years until I finally popped 
for a set of the official MB pullers a year ago.  They are stout!!

-D


> On Feb 12, 2018, at 2:49 PM, Meade Dillon via Mercedes 
> <mercedes@okiebenz.com> wrote:
> 
> Fashion a couple of hooks from some really stiff wire, insert in the same
> area that you would for a 123 cluster, rotate and pull out.
> 
> BUT before you do that: Unhook the speedometer cable to provide some slack
> to avoid putting a kink in the cable.  It is anchored below the dash under
> the carpet / foot rest, right below the steering column.  You may also want
> to unhook from the transmission and push some up into the passenger
> compartment to make sure you don't kink the cable.
> 
> -------------
> Max
> Charleston SC
> 
> On Mon, Feb 12, 2018 at 2:04 PM, Craig via Mercedes <mercedes@okiebenz.com>
> wrote:
> 
>> In wanting to work on the speedometer/odometer of our '90 E300D, I need
>> to get the instrument cluster out.
>> 
>> How do I do that? Any tips or hints?
>> 
>> Thanks,
>> 
>> 
>> Craig
>> 
>> _______________________________________
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
> _______________________________________
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> 


_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to