So was the switch the problem??
On 4/17/06, Rich Thomas <[EMAIL PROTECTED]> wrote: > > Sometimes it might be due to the frame (regulator) being bent -- it'll > slide down enough then when the motor torques it to go up it bends and > won't move. Glad it was just the switch. > > --R > > > Bob Rentfro wrote: > > >Switch, aye. > > > >Bob Rentfro > > > >----- Original Message ----- > >From: "Jim Cathey" <[EMAIL PROTECTED]> > >To: "Mercedes Discussion List" <[EMAIL PROTECTED]> > >Sent: Monday, April 17, 2006 12:57 PM > >Subject: Re: [MBZ] Getting Window Up > > > > > > > > > >>>Passenger front window will go down, will not come up. > >>>Should I: > >>>Check switch first...or take door apart? > >>> > >>> > >>Switch. They get very dirty. Take it apart and clean it. > >>I use the shower with a rag over the drain. That usually > >>captures any flying parts. (Once you've done a few you > >>don't need that level of precaution.) > >> > >>-- Jim > >> > >> > >>_______________________________________ > >>http://www.striplin.net > >>For new parts see official list sponsor: http://www.buymbparts.com/ > >>For used parts email [EMAIL PROTECTED] > >> > >>To Unsubscribe or change delivery options go to: > >>http://striplin.net/mailman/listinfo/mercedes_striplin.net > >> > >> > >> > > > >_______________________________________ > >http://www.striplin.net > >For new parts see official list sponsor: http://www.buymbparts.com/ > >For used parts email [EMAIL PROTECTED] > > > >To Unsubscribe or change delivery options go to: > >http://striplin.net/mailman/listinfo/mercedes_striplin.net > > > > > > > > > _______________________________________ > http://www.striplin.net > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net >