That is strange, I have never had any issues clearing codes with DAS.  Maybe 99 is some strange year between DAS and HHT.  I think all modules on any 163 I have worked on have been accessed with DAS, but 01 and up is the only ML I have worked on.

On 5/30/2020 8:16 PM, Buggered Benzmail via Mercedes wrote:
I “cleared” the codes (it was contact problems with a bunch of solenoids which 
is usually the conductor plate although I guess it could be the cable or TCM) 
with the iCarsoft, it said they were gone. I put the DAS on it and found them 
though so I guess the little unit did not clear them even though it said they 
were clear.

DAS was trying to do something with HHTWIN but there’s no 163 chassis choice in 
there. I got back into the main DAS and could see the codes from there in the 
trans ECU scan. I tried to clear them with the DAS but it said it couldn’t.

This is making me crazy.

--FT
Sent from iPhone

On May 30, 2020, at 8:04 PM, Kaleb Striplin via Mercedes 
<mercedes@okiebenz.com> wrote:

You need Xentry to clear tranny codes, not sure if car soft will do it. In any 
case were the codes related to conductor plate? You probably would not know 
that for sure either without Xentry.

Sent from my iPhone

On May 30, 2020, at 4:46 PM, Buggered Benzmail via Mercedes 
<mercedes@okiebenz.com> wrote:

I ordered a new conductor plate and connector for the 99 ML320 as I figured 
that must be the issue with it stuck in limp mode. The PO said he had changed 
it but clearly not, the fluid I drained out looked like old diesel oil. So I 
finished the job today, new CP, filter, fluid, etc. drained the torque 
converter too.

I put the little iCarsoft scanner on it and cleared all the solenoids codes. 
Drove it, still stuck in 2nd. Hmmmm. I’m wondering now if this scanner thing 
does not actually reset the nanny. When I did this job on the 99 E320 I used 
the Star computer and it got the nanny reset. I’m gonna try the computer and 
see what’s up on that box.

I have a TCM in the wrecked E300, same 722.6 tranny, I can try that if It is 
still acting up

--FT
Sent from iPhone
_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to