7x 603 078 01 41 (Injection pipe clips)
7x 601 078 26 41 (Injection pipe shims--trim them on one side)
2x 601 078 26 41 (Injection pipe clips)
1x 606 141 01 80 (Intake manifold gasket)
6x 017 997 41 48 (Bosch 1-460-210-321 O-ring, you may want spares)
6x 004 997 45 40 (Bosch 1-410-105-021 Copper seal washer)
This was for a 606, but the orings and seals are the same on 601,2,3
At 02:20 PM 5/17/2006, you wrote:
Many thanks Peter. Do you have a part number or source for the copper seals?
Thanks,
Bruce
Peter Frederick <[EMAIL PROTECTED]> wrote:
25 ft/lbs twice, then 30 ft/lbs. Leaks, however, are bad o-rings that
need to be replaced. Get new internal copper seals and do that at the
same time.
Peter
_______________________________________
http://www.striplin.net
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://striplin.net/mailman/listinfo/mercedes_striplin.net
Bruce
82 300CD 334kmi 'His'
85 300CD 240kmi 'Hers'
75 240D 202kmi 'Donner'
77 240D 204kmi 'Blitzen'
73 220D 'It'
---------------------------------
Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries for just
2ยข/min with Yahoo! Messenger with Voice.
_______________________________________
http://www.striplin.net
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://striplin.net/mailman/listinfo/mercedes_striplin.net
