I probably don't understand the setup but Randy is correct in stating the 
breaker rating should not exceed the amp capacity of the wires.  In the US 
that's 15 amp-14 AWG, 20 amp-12 AWG, 30 amp-10 AWG, and 40 amp-8 AWG, and 55 
amp-6 AWG for normal copper NM cable.

-----Original Message-----
From: Mercedes On Behalf Of Randy Bennell via Mercedes
Sent: Sunday, November 28, 2021 8:00 PM
To: Kaleb Striplin via Mercedes <mercedes@okiebenz.com>
Cc: Randy Bennell <tyee...@gmail.com>
Subject: Re: [MBZ] Lift wiring

I am not an electrician but I don't think you should have the lift wiring on a 
50 amp circuit. The whole point of wire sizing and breaker sizing is to protect 
the circuit. If it is overloaded, it is supposed to switch itself off.

On 11/28/2021 3:22 PM, Kaleb Striplin via Mercedes wrote:
> Just finished up the wiring for both lifts. The alignment lift already has 
> the flex power cord type line. I think they call it SJ or something like 
> that. Decided to use that for the 2 post. Ran it up and over the rafters then 
> mounted a 60 amp disconnect on the wall in front of the lifts. Wired the 
> lifts to the breaker and 220 coming in from its distribution box. Not the 
> prettiest job but is safe and gets the job done. I will probably never need 
> to use that disconnect but it’s there just in case and provides a good way to 
> wire both together. In my situation I will never run both lifts at once so 
> can do a shared circuit. Really even with both running at once it would most 
> likely be fine as they require 20 amps and it’s on a 50 amp circuit. Or maybe 
> I will flip that disconnect off when the lifts are not in use as a safety 
> precaution.
>
> Next up is to fill op the hydraulic fluid and adjust the cables and it’s a 
> done deal. Will then get the alignment lift up and going as well. I may 
> finish this up today or might do it tomorrow.
>
>

_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to