The "cable" that extends the antenna has been previously broken off at the end and "shortened." OTOH, it could have been affixed to the motor by threading it too far through. These are just my guesses.
Tom Potter -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Glenn Brown Sent: Tuesday, March 13, 2007 1:59 PM To: mercedes@okiebenz.com Subject: [MBZ] Auto extending_retracting antenna on 300D I periodically use a silicone spray lube on my '84 300D antenna to clean the shaft(s) to prevent sticking due to dirt. The antenna appears to have four sections, but only the top (narrowest) and bottom sections extend no matter how much effort is taken in cleaning and running the antenna up and down. I've even tried pulling on the top section as hard as I could while it was extending to see if I could help "unstick" the center two sections. Anybody got a clue? TIA. G. M. Brown Rochester, NY _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com