Curt, I'm not an expert on the MB buzzer box as I've never had the pleasure of taking one apart but if what you saw was a small black box piece with two connections in there that would do the buzzing, you might want to get an after market add-on buzzer at someplace like Autozone or Advance sometimes Walmart. They are usually small (1/2 x 3/4 x1/2 inch or less) with two wires coming out that you would hook between the headlight and the ignition wires. They don't cost more than 3-5 bucks and may work in place of that little black box thingie. Do a temp solder job on the wires to the black box input and then if it works just replace the box with this one and use a bit of epoxy to hold it in place. If you need it to be louder then drill a big enough hole in the plastic overcase and glue the buzzer to that with the sound opening to the hole.
Manfred Date: Wed, 7 May 2008 06:18:38 -0700 (PDT) From: Curt Raymond <[EMAIL PROTECTED]> I should have taken pictures, what you're describing seems in no way to relate to what I saw. Inside the casing I found NO moving parts, just a little black box buzzer thing which made very little noise. I also saw no way for it to contact the case... -Curt _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
