In "manual" derivative mode (always used on nv50 and sometimes on nvc0 but always for cube), the idea is that using the quadop instruction, we set up the "other" quads to have values such that the derivatives work out, and then run the texture instruction as if nothing were strange. It pulls values from the other lanes, and does its magic.
However cube coordinates have to be normalized - one of the 3 coords has to be 1, to determine which is the major axis, to say which face is being sampled. We were normalizing the coordinates first, and then adding the derivatives. This is wrong for two reasons: - the coordinates got normalized by a scaling factor but the derivatives didn't - the result of the addition didn't end up normalized To resolve this, we flip the logic around to normalize *after* the per-lane coordinates are set up. This fixes a bunch of textureGrad cube dEQP tests. NOTE: nv50 cube arrays with explicit derivatives are still broken, to be resolved at a later date. Signed-off-by: Ilia Mirkin <[email protected]> Cc: "11.1 11.2" <[email protected]> --- .../drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp | 12 -------- .../nouveau/codegen/nv50_ir_lowering_gm107.cpp | 18 ++++++++++- .../nouveau/codegen/nv50_ir_lowering_nv50.cpp | 34 ++++++++++++++++++++- .../nouveau/codegen/nv50_ir_lowering_nvc0.cpp | 35 +++++++++++++++++++++- 4 files changed, 84 insertions(+), 15 deletions(-) diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp b/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp index d284446..f00f990 100644 --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp @@ -1989,7 +1989,6 @@ Converter::loadProjTexCoords(Value *dst[4], Value *src[4], unsigned int mask) void Converter::handleTEX(Value *dst[4], int R, int S, int L, int C, int Dx, int Dy) { - Value *val; Value *arg[4], *src[8]; Value *lod = NULL, *shd = NULL; unsigned int s, c, d; @@ -2032,17 +2031,6 @@ Converter::handleTEX(Value *dst[4], int R, int S, int L, int C, int Dx, int Dy) shd = src[n - 1]; } - if (tgt.isCube()) { - for (c = 0; c < 3; ++c) - src[c] = mkOp1v(OP_ABS, TYPE_F32, getSSA(), arg[c]); - val = getScratch(); - mkOp2(OP_MAX, TYPE_F32, val, src[0], src[1]); - mkOp2(OP_MAX, TYPE_F32, val, src[2], val); - mkOp1(OP_RCP, TYPE_F32, val, val); - for (c = 0; c < 3; ++c) - src[c] = mkOp2v(OP_MUL, TYPE_F32, getSSA(), arg[c], val); - } - for (c = 0, d = 0; c < 4; ++c) { if (dst[c]) { texi->setDef(d++, dst[c]); diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_gm107.cpp b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_gm107.cpp index 0b90378..a5deaef 100644 --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_gm107.cpp +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_gm107.cpp @@ -67,6 +67,7 @@ GM107LoweringPass::handleManualTXD(TexInstruction *i) tmp = bld.getScratch(); for (l = 0; l < 4; ++l) { + Value *src[3], *val; // mov coordinates from lane l to all lanes bld.mkOp(OP_QUADON, TYPE_NONE, NULL); for (c = 0; c < dim; ++c) { @@ -92,10 +93,25 @@ GM107LoweringPass::handleManualTXD(TexInstruction *i) add->lanes = 1; /* abused for .ndv */ } + // normalize cube coordinates if necessary + if (i->tex.target.isCube()) { + for (c = 0; c < 3; ++c) + src[c] = bld.mkOp1v(OP_ABS, TYPE_F32, bld.getSSA(), crd[c]); + val = bld.getScratch(); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[0], src[1]); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[2], val); + bld.mkOp1(OP_RCP, TYPE_F32, val, val); + for (c = 0; c < 3; ++c) + src[c] = bld.mkOp2v(OP_MUL, TYPE_F32, bld.getSSA(), crd[c], val); + } else { + for (c = 0; c < dim; ++c) + src[c] = crd[c]; + } + // texture bld.insert(tex = cloneForward(func, i)); for (c = 0; c < dim; ++c) - tex->setSrc(c + array, crd[c]); + tex->setSrc(c + array, src[c]); bld.mkOp(OP_QUADPOP, TYPE_NONE, NULL); // save results diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nv50.cpp b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nv50.cpp index 42e24f6..227a02d 100644 --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nv50.cpp +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nv50.cpp @@ -724,6 +724,23 @@ NV50LoweringPreSSA::handleTEX(TexInstruction *i) const int dref = arg; const int lod = i->tex.target.isShadow() ? (arg + 1) : arg; + /* Only normalize in the non-explicit derivatives case. + */ + if (i->tex.target.isCube() && i->op != OP_TXD) { + Value *src[3], *val; + int c; + for (c = 0; c < 3; ++c) + src[c] = bld.mkOp1v(OP_ABS, TYPE_F32, bld.getSSA(), i->getSrc(c)); + val = bld.getScratch(); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[0], src[1]); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[2], val); + bld.mkOp1(OP_RCP, TYPE_F32, val, val); + for (c = 0; c < 3; ++c) { + i->setSrc(c, bld.mkOp2v(OP_MUL, TYPE_F32, bld.getSSA(), + i->getSrc(c), val)); + } + } + // handle MS, which means looking up the MS params for this texture, and // adjusting the input coordinates to point at the right sample. if (i->tex.target.isMS()) { @@ -941,6 +958,7 @@ NV50LoweringPreSSA::handleTXD(TexInstruction *i) bld.mkOp(OP_QUADON, TYPE_NONE, NULL); for (l = 0; l < 4; ++l) { + Value *src[3], *val; // mov coordinates from lane l to all lanes for (c = 0; c < dim; ++c) bld.mkQuadop(0x00, crd[c], l, i->getSrc(c), zero); @@ -950,10 +968,24 @@ NV50LoweringPreSSA::handleTXD(TexInstruction *i) // add dPdy from lane l to lanes dy for (c = 0; c < dim; ++c) bld.mkQuadop(qOps[l][1], crd[c], l, i->dPdy[c].get(), crd[c]); + // normalize cube coordinates if necessary + if (i->tex.target.isCube()) { + for (c = 0; c < 3; ++c) + src[c] = bld.mkOp1v(OP_ABS, TYPE_F32, bld.getSSA(), crd[c]); + val = bld.getScratch(); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[0], src[1]); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[2], val); + bld.mkOp1(OP_RCP, TYPE_F32, val, val); + for (c = 0; c < 3; ++c) + src[c] = bld.mkOp2v(OP_MUL, TYPE_F32, bld.getSSA(), crd[c], val); + } else { + for (c = 0; c < dim; ++c) + src[c] = crd[c]; + } // texture bld.insert(tex = cloneForward(func, i)); for (c = 0; c < dim; ++c) - tex->setSrc(c, crd[c]); + tex->setSrc(c, src[c]); // save results for (c = 0; i->defExists(c); ++c) { Instruction *mov; diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp index d0936d8..33d63c5 100644 --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp @@ -615,6 +615,24 @@ NVC0LoweringPass::handleTEX(TexInstruction *i) const int lyr = arg - (i->tex.target.isMS() ? 2 : 1); const int chipset = prog->getTarget()->getChipset(); + /* Only normalize in the non-explicit derivatives case. For explicit + * derivatives, this is handled in handleManualTXD. + */ + if (i->tex.target.isCube() && i->dPdx[0].get() == NULL) { + Value *src[3], *val; + int c; + for (c = 0; c < 3; ++c) + src[c] = bld.mkOp1v(OP_ABS, TYPE_F32, bld.getSSA(), i->getSrc(c)); + val = bld.getScratch(); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[0], src[1]); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[2], val); + bld.mkOp1(OP_RCP, TYPE_F32, val, val); + for (c = 0; c < 3; ++c) { + i->setSrc(c, bld.mkOp2v(OP_MUL, TYPE_F32, bld.getSSA(), + i->getSrc(c), val)); + } + } + // Arguments to the TEX instruction are a little insane. Even though the // encoding is identical between SM20 and SM30, the arguments mean // different things between Fermi and Kepler+. A lot of arguments are @@ -861,6 +879,7 @@ NVC0LoweringPass::handleManualTXD(TexInstruction *i) bld.mkOp(OP_QUADON, TYPE_NONE, NULL); for (l = 0; l < 4; ++l) { + Value *src[3], *val; // mov coordinates from lane l to all lanes for (c = 0; c < dim; ++c) bld.mkQuadop(0x00, crd[c], l, i->getSrc(c + array), zero); @@ -870,10 +889,24 @@ NVC0LoweringPass::handleManualTXD(TexInstruction *i) // add dPdy from lane l to lanes dy for (c = 0; c < dim; ++c) bld.mkQuadop(qOps[l][1], crd[c], l, i->dPdy[c].get(), crd[c]); + // normalize cube coordinates + if (i->tex.target.isCube()) { + for (c = 0; c < 3; ++c) + src[c] = bld.mkOp1v(OP_ABS, TYPE_F32, bld.getSSA(), crd[c]); + val = bld.getScratch(); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[0], src[1]); + bld.mkOp2(OP_MAX, TYPE_F32, val, src[2], val); + bld.mkOp1(OP_RCP, TYPE_F32, val, val); + for (c = 0; c < 3; ++c) + src[c] = bld.mkOp2v(OP_MUL, TYPE_F32, bld.getSSA(), crd[c], val); + } else { + for (c = 0; c < dim; ++c) + src[c] = crd[c]; + } // texture bld.insert(tex = cloneForward(func, i)); for (c = 0; c < dim; ++c) - tex->setSrc(c + array, crd[c]); + tex->setSrc(c + array, src[c]); // save results for (c = 0; i->defExists(c); ++c) { Instruction *mov; -- 2.7.3 _______________________________________________ mesa-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/mesa-dev
