On 11/01/2019 11:37, Eric Engestrom wrote:
On Friday, 2019-01-11 10:58:38 +0100, Iago Toral Quiroga wrote:
We had defined MAX_IMAGES as 8, which we used to size the array for
image push constant data. The comment there stated that this was for
gen8, but anv_nir_apply_pipeline_layout runs for all gens and writes
that array, asserting that we don't exceed that number of images,
which imposes a limit of MAX_IMAGES on all gens.

Furthermore, despite this, we are exposing up to 64 images per shader
stage on all gens, gen8 included.

This patch lowers the number of images we expose in gen8 to 8 and
keeps 64 images for gen9+. It also sets MAX_IMAGES to 64 so we can
actually use up to 64 images in shaders, and then adds an assert
specific to gen8 to check that we never exceed 8.
---
  src/intel/vulkan/anv_device.c                    | 7 +++++--
  src/intel/vulkan/anv_nir_apply_pipeline_layout.c | 4 +++-
  src/intel/vulkan/anv_private.h                   | 4 ++--
  3 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/src/intel/vulkan/anv_device.c b/src/intel/vulkan/anv_device.c
index cd179e6801..122a58cfd6 100644
--- a/src/intel/vulkan/anv_device.c
+++ b/src/intel/vulkan/anv_device.c
@@ -987,9 +987,12 @@ void anv_GetPhysicalDeviceProperties(
     const uint32_t max_samplers = (devinfo->gen >= 8 || devinfo->is_haswell) ?
                                   128 : 16;
+ const uint32_t max_images = devinfo->gen < 9 ? MAX_GEN8_IMAGES : MAX_IMAGES;
+
     VkSampleCountFlags sample_counts =
        isl_device_get_sample_counts(&pdevice->isl_dev);
+
     VkPhysicalDeviceLimits limits = {
        .maxImageDimension1D                      = (1 << 14),
        .maxImageDimension2D                      = (1 << 14),
@@ -1009,7 +1012,7 @@ void anv_GetPhysicalDeviceProperties(
        .maxPerStageDescriptorUniformBuffers      = 64,
        .maxPerStageDescriptorStorageBuffers      = 64,
        .maxPerStageDescriptorSampledImages       = max_samplers,
-      .maxPerStageDescriptorStorageImages       = 64,
+      .maxPerStageDescriptorStorageImages       = max_images,
        .maxPerStageDescriptorInputAttachments    = 64,
        .maxPerStageResources                     = 250,
        .maxDescriptorSetSamplers                 = 6 * max_samplers, /* number 
of stages * maxPerStageDescriptorSamplers */
@@ -1018,7 +1021,7 @@ void anv_GetPhysicalDeviceProperties(
        .maxDescriptorSetStorageBuffers           = 6 * 64,           /* number 
of stages * maxPerStageDescriptorStorageBuffers */
        .maxDescriptorSetStorageBuffersDynamic    = MAX_DYNAMIC_BUFFERS / 2,
        .maxDescriptorSetSampledImages            = 6 * max_samplers, /* number 
of stages * maxPerStageDescriptorSampledImages */
-      .maxDescriptorSetStorageImages            = 6 * 64,           /* number 
of stages * maxPerStageDescriptorStorageImages */
+      .maxDescriptorSetStorageImages            = 6 * max_images,   /* number 
of stages * maxPerStageDescriptorStorageImages */
        .maxDescriptorSetInputAttachments         = 256,
        .maxVertexInputAttributes                 = MAX_VBS,
        .maxVertexInputBindings                   = MAX_VBS,
diff --git a/src/intel/vulkan/anv_nir_apply_pipeline_layout.c 
b/src/intel/vulkan/anv_nir_apply_pipeline_layout.c
index a0fd226b0a..e16ad4f032 100644
--- a/src/intel/vulkan/anv_nir_apply_pipeline_layout.c
+++ b/src/intel/vulkan/anv_nir_apply_pipeline_layout.c
@@ -537,7 +537,9 @@ anv_nir_apply_pipeline_layout(const struct 
anv_physical_device *pdevice,
     }
if (map->image_count > 0) {
-      assert(map->image_count <= MAX_IMAGES);
+      assert(map->image_count <= MAX_IMAGES &&
+             (pdevice->compiler->devinfo->gen > 8 ||
+              map->image_count < MAX_GEN8_IMAGES));
s/ < / <= /, but I would also write it differently:

   assert((pdevice->compiler->devinfo->gen <= 8 && map->image_count <= 
MAX_GEN8_IMAGES) ||
          map->image_count <= MAX_IMAGES);

I don't know about the numbers, but code-wise it looks all reasonable.


Isn't there a consistency issue here?


image_count <= MAX_IMAGES on gen9+

image_count < MAX_GEN8_IMAGES gen8 and below


Surely we want the same comparison operator regardless of the gen?


-

Lionel



        assert(shader->num_uniforms == prog_data->nr_params * 4);
        state.first_image_uniform = shader->num_uniforms;
        uint32_t *param = brw_stage_prog_data_add_params(prog_data,
diff --git a/src/intel/vulkan/anv_private.h b/src/intel/vulkan/anv_private.h
index 903931472d..3af7982bae 100644
--- a/src/intel/vulkan/anv_private.h
+++ b/src/intel/vulkan/anv_private.h
@@ -157,7 +157,8 @@ struct gen_l3_config;
  #define MAX_SCISSORS    16
  #define MAX_PUSH_CONSTANTS_SIZE 128
  #define MAX_DYNAMIC_BUFFERS 16
-#define MAX_IMAGES 8
+#define MAX_IMAGES 64
+#define MAX_GEN8_IMAGES 8
  #define MAX_PUSH_DESCRIPTORS 32 /* Minimum requirement */
/* The kernel relocation API has a limitation of a 32-bit delta value
@@ -1864,7 +1865,6 @@ struct anv_push_constants {
     /* Used for vkCmdDispatchBase */
     uint32_t base_work_group_id[3];
- /* Image data for image_load_store on pre-SKL */
     struct brw_image_param images[MAX_IMAGES];
  };
--
2.17.1

_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/mesa-dev
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/mesa-dev


_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/mesa-dev

Reply via email to