* Current am180x-evm ships with a PG 2 wilink 6 module that isn't supported in newer wilink 6 releases. * A newer PG 3 wilink 6 module is available for am180x-evm but needs to be purchased separately.. * Bring old r5.00.18 hostap-daemon recipe with updated recipe name to add support for am180x-evm default wilink 6 module.
Signed-off-by: Franklin S. Cooper Jr <[email protected]> --- Version 2 changes: None. Apart of new patchset. ...d-change-conf-file-for-better-oob-startup.patch | 49 ++++++++++++++++++++ .../hostap/hostap-daemon_r5.00.18.bb | 11 ++++ 2 files changed, 60 insertions(+), 0 deletions(-) create mode 100644 meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-r5.00.18/0001-hostapd-change-conf-file-for-better-oob-startup.patch create mode 100644 meta-arago-extras/recipes-connectivity/hostap/hostap-daemon_r5.00.18.bb diff --git a/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-r5.00.18/0001-hostapd-change-conf-file-for-better-oob-startup.patch b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-r5.00.18/0001-hostapd-change-conf-file-for-better-oob-startup.patch new file mode 100644 index 0000000..fa68357 --- /dev/null +++ b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-r5.00.18/0001-hostapd-change-conf-file-for-better-oob-startup.patch @@ -0,0 +1,49 @@ +From 4c5fe9901219956fb754306a2093e78fb460bbdd Mon Sep 17 00:00:00 2001 +From: Eyal Reizer <[email protected]> +Date: Thu, 23 Jun 2011 10:13:44 +0300 +Subject: [PATCH] hostapd: change conf file for better sdk out of box startup + +The default hostapd.conf file that is fetched from upstream is using +a band which is not supported by the 1271 chip. +I am using this amend.inc in order to modify it to use g band and default +channel 6 and change the ssid to a more meaningful name. + +Upstream-status: inappropriate [SDK specific patch] + +Signed-off-by: Eyal Reizer <[email protected]> +--- + hostapd/hostapd.conf | 6 +++--- + 1 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf +index 6d7263a..bb27beb 100644 +--- a/hostapd/hostapd.conf ++++ b/hostapd/hostapd.conf +@@ -83,7 +83,7 @@ ctrl_interface_group=0 + ##### IEEE 802.11 related configuration ####################################### + + # SSID to be used in IEEE 802.11 management frames +-ssid=test ++ssid=TexasInstruments_0001 + + # Country code (ISO/IEC 3166-1). Used to set regulatory domain. + # Set as needed to indicate country in which device is operating. +@@ -99,14 +99,14 @@ ssid=test + + # Operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g, + # Default: IEEE 802.11b +-hw_mode=a ++hw_mode=g + + # Channel number (IEEE 802.11) + # (default: 0, i.e., not set) + # Please note that some drivers (e.g., madwifi) do not use this value from + # hostapd and the channel will need to be configuration separately with + # iwconfig. +-channel=60 ++channel=6 + + # Beacon interval in kus (1.024 ms) (default: 100; range 15..65535) + beacon_int=100 +-- +1.7.0.4 diff --git a/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon_r5.00.18.bb b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon_r5.00.18.bb new file mode 100644 index 0000000..aa6f5bb --- /dev/null +++ b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon_r5.00.18.bb @@ -0,0 +1,11 @@ +# This is a TI specific version of the hostap-daemon recipe for use with the +# wl12xx wlan and bluetooth module. + +require hostap.inc + +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://../COPYING;md5=c54ce9345727175ff66d17b67ff51f58" + +PR_append = "a+gitr${SRCPV}" + +SRCREV = "ol_R5.00.18" -- 1.7.0.4 _______________________________________________ meta-arago mailing list [email protected] http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
