On Thu, Jun 06, 2013 at 04:47:48PM -0500, Franklin S. Cooper Jr wrote: > * The version of the wl1271-nvs.bin included in the current repository was > meant > for Wilink 7 not Wilink 6. > * This caused firmware errors which caused Wilink 6 not to work on any boards > that don't rerun a calibration script. > * Use the Wilink 6 version of the nvs file to use a version supported by > Wilink > 6 so by default wireless will work.
Any chance to get this resolved in the upstream TI-OpenLink repository, instead of dumping a binary here in the metadata? > Signed-off-by: Franklin S. Cooper Jr <[email protected]> > --- > .../wl1271-nvs.bin-wilink6 | Bin 0 -> 912 bytes > .../wl12xx-firmware/wl12xx-firmware_r5.sp4.01.bb | 7 ++++++- > 2 files changed, 6 insertions(+), 1 deletions(-) > create mode 100644 > meta-arago-extras/recipes-bsp/wl12xx-firmware/wl12xx-firmware-r5.sp4.01/wl1271-nvs.bin-wilink6 > > diff --git > a/meta-arago-extras/recipes-bsp/wl12xx-firmware/wl12xx-firmware-r5.sp4.01/wl1271-nvs.bin-wilink6 > > b/meta-arago-extras/recipes-bsp/wl12xx-firmware/wl12xx-firmware-r5.sp4.01/wl1271-nvs.bin-wilink6 > new file mode 100644 > index > 0000000000000000000000000000000000000000..bb6ff93e585cbc92e1270a3a01779d0614616441 > GIT binary patch > literal 912 > zcmZR~4PgKR#zHU!VnP7pOvbNJCKJPte=uQe^tV53Y#dx%Jp6*9;?i;|3|b5Z4CV}W > z3@!|Q4517$4Dk$!46zIm*tCv{0Yl)=-+%xA1ET;4n3$M|2ofe?Y>HMf1I=IpnZ(2j > zl4oRO;AD{y;9&Uv{`q~70KYvdp8-uCq=w<mHwGSwAAcA)1U~#=;1U6gQAU(AHZaJ_ > qE2*h#O35p!s;Z00$|<O*2H*jpU|?bp6%`c}73GuDrOf&vrW*iCk}^R6 > > literal 0 > HcmV?d00001 > > diff --git > a/meta-arago-extras/recipes-bsp/wl12xx-firmware/wl12xx-firmware_r5.sp4.01.bb > b/meta-arago-extras/recipes-bsp/wl12xx-firmware/wl12xx-firmware_r5.sp4.01.bb > index 2232e1c..96b15e0 100644 > --- > a/meta-arago-extras/recipes-bsp/wl12xx-firmware/wl12xx-firmware_r5.sp4.01.bb > +++ > b/meta-arago-extras/recipes-bsp/wl12xx-firmware/wl12xx-firmware_r5.sp4.01.bb > @@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = > "file://LICENCE;md5=ba590e1d103f891d0151609046aef9e8" > > PACKAGE_ARCH = "all" > > -PR = "r3+gitr${SRCPV}" > +PR = "r4+gitr${SRCPV}" > > # This recipe provides the latest firmware files for wl12xx. > # Therefore, use the contents of this recipe instead of the contents > @@ -16,6 +16,7 @@ RPROVIDES_${PN} = "linux-firmware-wl12xx" > SRCREV = "c8d6b8e6ddf81091e1b1c99ebfb6751cc62b2c63" > SRC_URI = "git://github.com/TI-OpenLink/ti-utils.git;protocol=git \ > file://Makefile \ > + file://wl1271-nvs.bin-wilink6 \ > " > > S = "${WORKDIR}/git/hw/firmware" > @@ -26,6 +27,10 @@ do_compile() { > > do_install() { > cp ${WORKDIR}/Makefile ${S} > + # Remove Wilink 7 version > + rm ${S}/wl1271-nvs.bin > + # Copy and use Wilink 6 version > + cp ${WORKDIR}/wl1271-nvs.bin-wilink6 ${S}/wl1271-nvs.bin > oe_runmake 'DEST_DIR=${D}' install > } > > -- > 1.7.0.4 > > _______________________________________________ > meta-arago mailing list > [email protected] > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago _______________________________________________ meta-arago mailing list [email protected] http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
