Hi Denys,
This was a single patch in Processor SDK to add IEC-62439-3 MIB support
. This was held up because the size limit is exceeded. I can split in to
multiple patches and re-send. Do I need to do anything else?
Also wondering why the base net-snmp is not part of the core SDK. There
was a requirement I have added sometime back to have the base Net-SNMP
part of the file system. Other than this patch, is there any other
update needed (Package group) to include Net-SNMP in the file system.
I see
./meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-connectivity.bb
has net-snmp. So does it mean net-snmp is expected
to be already part of the SDK 7.1 file system?
As a first step I would like to have interfaces MIB working which list
all network interfaces in the system. What should I do it get it
enabled?
Aparna, could you help me locate the Net-SNMP requirement? Do you have
any info on if net-snmp is part of 7.1?
Thanks
Murali
On 8/4/20 5:19 PM, [email protected] wrote:
Your mail to 'meta-arago' with the subject
[PATCH] net-snmp: update recipe for IEC-62439-3 MIB used in
HSR/PRP protocols
Is being held until the list moderator can review it for approval.
The reason it is being held:
Message body is too big: 2843957 bytes with a limit of 100 KB
Either the message will get posted to the list, or you will receive
notification of the moderator's decision. If you would like to cancel
this posting, please visit the following URL:
http://arago-project.org/cgi-bin/mailman/confirm/meta-arago/4a672f9a16205bed61aa52c9cadc382f58138d79
--
Murali Karicheri
Texas Instruments
_______________________________________________
meta-arago mailing list
[email protected]
http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
