This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.
Signed-off-by: Andrew Davis <[email protected]> --- .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt diff --git a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted file mode 100644 index 80ea34f5..00000000 --- a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt +++ /dev/null @@ -1,19 +0,0 @@ -# This uEnv.txt file can contain additional environment settings that you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is: -# variable=value -# NOTE: This file will be evaluated after the bootcmd is run and the -# bootcmd must be set to load this file if it exists (this is the -# default on all newer U-Boot images. This also means that some -# variables such as bootdelay cannot be changed by this file since -# it is not evaluated until the bootcmd is run. - -# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board. -def_board_name="am65x" - -# Check if using default board_name when name_overlays is not set -check_for_board=if test $name_overlays; then echo "Using board_name = $board_name"; else setenv board_name $def_board_name; fi - -uenvcmd=run check_for_board; run findfdt -- 2.36.1 -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#13885): https://lists.yoctoproject.org/g/meta-arago/message/13885 Mute This Topic: https://lists.yoctoproject.org/mt/91524284/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
