It is not applied in master yet. I have not had time to keep it in sync
with dunfell given all of the layer changes. I believe Denys will be
doing another sync up soon.
On 6/26/2022 15:18, Humphreys, Jonathan wrote:
Ryan, I do not see this patch applied to master. Can you check?
Thanks
Jon
-----Original Message-----
From: [email protected] <[email protected]> On
Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove
uEnv.txt for k3
On Thu, Jun 9, 2022 at 10:05 AM, Andrew Davis wrote:
This fixup should have been done in u-boot and not in a uEnv.txt file.
It is not correct for all K3 anymore either. Remove it.
Signed-off-by: Andrew Davis <[email protected]>
---
Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv
.../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 -------------------
1 file changed, 19 deletions(-)
delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
diff --git
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
deleted file mode 100644
index 80ea34f5..00000000
---
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings that
you -# want to set in U-Boot at boot time. This can be simple
variables such -# as the serverip or custom variables. The format of this file
is:
-# variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-# bootcmd must be set to load this file if it exists (this is the
-# default on all newer U-Boot images. This also means that some
-# variables such as bootdelay cannot be changed by this file since
-# it is not evaluated until the bootcmd is run.
-
Shouldn't we keep the above, as this is generic information about how to use
uEnv.txt and when it is invoked?
-# The specific board is not able to be automatically detected. The
below is a -# workaround to set a sane default incase the user has not
manually configured -# a specific board.
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set
-check_for_board=if test $name_overlays; then echo "Using board_name =
$board_name"; else setenv board_name $def_board_name; fi
-
-uenvcmd=run check_for_board; run findfdt
--
2.36.1
--
Ryan Eatmon [email protected]
-----------------------------------------
Texas Instruments, Inc. - LCPD - MGTS
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#13916):
https://lists.yoctoproject.org/g/meta-arago/message/13916
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
