On Tue, Feb 25, 2025 at 5:02 PM Ryan Eatmon <[email protected]> wrote:
> Those lines were that way before. Only the lines that get converted
> from OEBASE to TOPDIR were fixed. So those should all be ok.
>
Ah okay. Whoever uses those configs can fix them later if it's an issue.
>
>
>
> On 2/25/2025 12:11 PM, Jon Cormier wrote:
> > Looks like this got accepted, however there are several TMPDIR = lines
> > which use TOPDIR and have build in the path. These should be fixed as
> > well.
> >
> > src/templates/local-poky-v2.conf.xml
> > 52: <line>TMPDIR = "${TOPDIR}/build/poky-tmp"</line>
> >
> > src/templates/local-v2.conf.xml
> > 52: <line>TMPDIR = "${TOPDIR}/build/arago-tmp"</line>
> >
> > src/templates/local-poky-v3.conf.xml
> > 52: <line>TMPDIR = "${TOPDIR}/build/poky-tmp"</line>
> >
> > src/templates/local-v3.conf.xml
> > 52: <line>TMPDIR = "${TOPDIR}/build/arago-tmp"</line>
> >
> >
> > On Mon, Feb 24, 2025 at 11:45 AM Jon Cormier via
> > lists.yoctoproject.org
> > <[email protected]> wrote:
> >>
> >> On Mon, Feb 24, 2025 at 9:53 AM Jon Cormier via lists.yoctoproject.org
> >> <[email protected]> wrote:
> >>
> >>> Ryan, I also had a question about the bitbake-setup configs. Is there
> some
> >>> documentation on this setup tool? Googling this is tricky since the
> name
> >>> is so generic. The other tools docs pop right up in google.
> >>>
> >> Nevermind, looks like the work is being done here:
> >> https://github.com/kanavin/bitbake
> >>
> >>>
> >>> On Fri, Feb 21, 2025 at 2:18 PM Jon Cormier <[email protected]
> >
> >>> wrote:
> >>>
> >>>> Ryan, I think you also need to touch TMPDIR in a few of the local.conf
> >>>> files
> >>>>
> >>>>
> >>>> On Fri, Feb 21, 2025 at 11:31 AM Ryan Eatmon via
> >>>> lists.yoctoproject.org <[email protected]> wrote:
> >>>>>
> >>>>> When the conversion to the new XML/XSLT system was done, the
> reference
> >>>>> to OEBASE was converted to TOPDIR. The value for OEBASE was
> >>>>> historically the directory above the bitbake run dir which is what
> >>>>> TOPDIR is set to. This made the downloads and sstate_cache
> directories
> >>>>> appear down a level of directory that was unintended.
> >>>>>
> >>>>> This change updates the values for DL_DIR and SSTATE_DIR to be
> relative
> >>>>> to TOPDIR but back in the same location they were originally meant to
> >>> be
> >>>>> in.
> >>>>>
> >>>>> Signed-off-by: Ryan Eatmon <[email protected]>
> >>>>> ---
> >>>>> v2: I ran a make clean and make and a lot more configs got updated
> with
> >>>>> the change. Clearly I need to rework the make system.
> >>>>>
> >>>>> bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json | 2
> +-
> >>>>> .../arago-kirkstone-chromium-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-kirkstone-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-kirkstone-next-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-kirkstone-wip-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-master-chromium-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-master-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-master-next-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-master-selinux-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-master-wip-config/local.conf.sample | 4
> ++--
> >>>>> .../arago-scarthgap-chromium-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-scarthgap-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-scarthgap-next-config/local.conf.sample | 4
> ++--
> >>>>> .../arago-scarthgap-selinux-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/arago-scarthgap-wip-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.00.00.006-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.00.00.007-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.00.00.011-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.01.00.001-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.01.00.003-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.01.00.007-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.01.00.008-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.02.00.008-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.02.00.009-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.02.00.010-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-09.03.05-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-10.00.07-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-10.01.08-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-10.01.10-config/local.conf.sample | 4
> ++--
> >>>>> .../coresdk_coresdk-10.01.10-selinux-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/distroless-kirkstone-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/distroless-master-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/distroless-scarthgap-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/poky-kirkstone-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/poky-master-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/poky-master-wip-config/local.conf.sample | 4
> ++--
> >>>>> conf/templates/poky-scarthgap-config/local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> .../local.conf.sample | 4
> ++--
> >>>>> configs/arago-master-wip-config.txt | 2
> +-
> >>>>> .../processor-sdk-scarthgap-10.01.10.04-config.yml | 1 +
> >>>>> .../processor-sdk-scarthgap-chromium-10.01.10.04-config.yml | 1 +
> >>>>> kas/templates/local-arago64-v2.conf.yml | 4
> ++--
> >>>>> kas/templates/local-arago64-v3.conf.yml | 4
> ++--
> >>>>> kas/templates/local-poky-v2.conf.yml | 4
> ++--
> >>>>> kas/templates/local-poky-v3.conf.yml | 4
> ++--
> >>>>> kas/templates/local-v2.conf.yml | 4
> ++--
> >>>>> kas/templates/local-v3.conf.yml | 4
> ++--
> >>>>> sample-files/local-arago64-v2.conf.sample | 4
> ++--
> >>>>> sample-files/local-arago64-v3.conf.sample | 4
> ++--
> >>>>> sample-files/local-poky-v2.conf.sample | 4
> ++--
> >>>>> sample-files/local-poky-v3.conf.sample | 4
> ++--
> >>>>> sample-files/local-v2.conf.sample | 4
> ++--
> >>>>> sample-files/local-v3.conf.sample | 4
> ++--
> >>>>> src/bin/convert.pl | 2
> +-
> >>>>> src/templates/local-arago64-v2.conf.xml | 4
> ++--
> >>>>> src/templates/local-arago64-v3.conf.xml | 4
> ++--
> >>>>> src/templates/local-poky-v2.conf.xml | 4
> ++--
> >>>>> src/templates/local-poky-v3.conf.xml | 4
> ++--
> >>>>> src/templates/local-v2.conf.xml | 4
> ++--
> >>>>> src/templates/local-v3.conf.xml | 4
> ++--
> >>>>> 90 files changed, 175 insertions(+), 173 deletions(-)
> >>>>>
> >>>>> diff --git
> a/bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json
> >>>> b/bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json
> >>>>> index 1cc2962..8acd24a 100644
> >>>>> --- a/bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json
> >>>>> +++ b/bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json
> >>>>> @@ -9,7 +9,7 @@
> >>>>> "uri": "
> >>>> https://git.ti.com/git/arago-project/oe-layersetup.git";
> >>>>> }
> >>>>> },
> >>>>> - "rev": "wip"
> >>>>> + "rev": "master"
> >>>>> },
> >>>>> "path": "oe-layersetup"
> >>>>> },
> >>>>> diff --git
> >>>> a/conf/templates/arago-kirkstone-chromium-config/local.conf.sample
> >>>> b/conf/templates/arago-kirkstone-chromium-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> a/conf/templates/arago-kirkstone-chromium-config/local.conf.sample
> >>>>> +++
> b/conf/templates/arago-kirkstone-chromium-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/conf/templates/arago-kirkstone-config/local.conf.sample
> >>>> b/conf/templates/arago-kirkstone-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> --- a/conf/templates/arago-kirkstone-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-kirkstone-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/arago-kirkstone-next-config/local.conf.sample
> >>>> b/conf/templates/arago-kirkstone-next-config/local.conf.sample
> >>>>> index cb76dd8..d97939a 100644
> >>>>> --- a/conf/templates/arago-kirkstone-next-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-kirkstone-next-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>> a/conf/templates/arago-kirkstone-wip-config/local.conf.sample
> >>>> b/conf/templates/arago-kirkstone-wip-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> --- a/conf/templates/arago-kirkstone-wip-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-kirkstone-wip-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/arago-master-chromium-config/local.conf.sample
> >>>> b/conf/templates/arago-master-chromium-config/local.conf.sample
> >>>>> index f2e9587..720ce11 100644
> >>>>> --- a/conf/templates/arago-master-chromium-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-master-chromium-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/conf/templates/arago-master-config/local.conf.sample
> >>>> b/conf/templates/arago-master-config/local.conf.sample
> >>>>> index f2e9587..720ce11 100644
> >>>>> --- a/conf/templates/arago-master-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-master-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> a/conf/templates/arago-master-next-config/local.conf.sample
> >>>> b/conf/templates/arago-master-next-config/local.conf.sample
> >>>>> index 6c32f4b..c1549ac 100644
> >>>>> --- a/conf/templates/arago-master-next-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-master-next-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/arago-master-selinux-config/local.conf.sample
> >>>> b/conf/templates/arago-master-selinux-config/local.conf.sample
> >>>>> index 5cc19d4..dfb4873 100644
> >>>>> --- a/conf/templates/arago-master-selinux-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-master-selinux-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/conf/templates/arago-master-wip-config/local.conf.sample
> >>>> b/conf/templates/arago-master-wip-config/local.conf.sample
> >>>>> index f2e9587..720ce11 100644
> >>>>> --- a/conf/templates/arago-master-wip-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-master-wip-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/arago-scarthgap-chromium-config/local.conf.sample
> >>>> b/conf/templates/arago-scarthgap-chromium-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> a/conf/templates/arago-scarthgap-chromium-config/local.conf.sample
> >>>>> +++
> b/conf/templates/arago-scarthgap-chromium-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/conf/templates/arago-scarthgap-config/local.conf.sample
> >>>> b/conf/templates/arago-scarthgap-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> --- a/conf/templates/arago-scarthgap-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-scarthgap-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/arago-scarthgap-next-config/local.conf.sample
> >>>> b/conf/templates/arago-scarthgap-next-config/local.conf.sample
> >>>>> index dbb184b..3ad6481 100644
> >>>>> --- a/conf/templates/arago-scarthgap-next-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-scarthgap-next-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/arago-scarthgap-selinux-config/local.conf.sample
> >>>> b/conf/templates/arago-scarthgap-selinux-config/local.conf.sample
> >>>>> index 46869ad..c862657 100644
> >>>>> --- a/conf/templates/arago-scarthgap-selinux-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-scarthgap-selinux-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>> a/conf/templates/arago-scarthgap-wip-config/local.conf.sample
> >>>> b/conf/templates/arago-scarthgap-wip-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> --- a/conf/templates/arago-scarthgap-wip-config/local.conf.sample
> >>>>> +++ b/conf/templates/arago-scarthgap-wip-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.00.00.006-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.00.00.006-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.00.00.006-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.00.00.006-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.00.00.007-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.00.00.007-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.00.00.007-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.00.00.007-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.00.00.011-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.00.00.011-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.00.00.011-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.00.00.011-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.01.00.001-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.01.00.001-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.01.00.001-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.01.00.001-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.01.00.003-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.01.00.003-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.01.00.003-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.01.00.003-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.01.00.007-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.01.00.007-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.01.00.007-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.01.00.007-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.01.00.008-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.01.00.008-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.01.00.008-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.01.00.008-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.02.00.008-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.02.00.008-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.02.00.008-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.02.00.008-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.02.00.009-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.02.00.009-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.02.00.009-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.02.00.009-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.02.00.010-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.02.00.010-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>> a/conf/templates/coresdk_coresdk-09.02.00.010-config/local.conf.sample
> >>>>> +++
> >>>> b/conf/templates/coresdk_coresdk-09.02.00.010-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-09.03.05-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-09.03.05-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> a/conf/templates/coresdk_coresdk-09.03.05-config/local.conf.sample
> >>>>> +++
> b/conf/templates/coresdk_coresdk-09.03.05-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-10.00.07-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-10.00.07-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> a/conf/templates/coresdk_coresdk-10.00.07-config/local.conf.sample
> >>>>> +++
> b/conf/templates/coresdk_coresdk-10.00.07-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-10.01.08-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-10.01.08-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> a/conf/templates/coresdk_coresdk-10.01.08-config/local.conf.sample
> >>>>> +++
> b/conf/templates/coresdk_coresdk-10.01.08-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/coresdk_coresdk-10.01.10-config/local.conf.sample
> >>>> b/conf/templates/coresdk_coresdk-10.01.10-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> a/conf/templates/coresdk_coresdk-10.01.10-config/local.conf.sample
> >>>>> +++
> b/conf/templates/coresdk_coresdk-10.01.10-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/coresdk_coresdk-10.01.10-selinux-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/coresdk_coresdk-10.01.10-selinux-config/local.conf.sample
> >>>>> index e45417c..27f1704 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/coresdk_coresdk-10.01.10-selinux-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/coresdk_coresdk-10.01.10-selinux-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/distroless-kirkstone-config/local.conf.sample
> >>>> b/conf/templates/distroless-kirkstone-config/local.conf.sample
> >>>>> index 46cb253..b499977 100644
> >>>>> --- a/conf/templates/distroless-kirkstone-config/local.conf.sample
> >>>>> +++ b/conf/templates/distroless-kirkstone-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> a/conf/templates/distroless-master-config/local.conf.sample
> >>>> b/conf/templates/distroless-master-config/local.conf.sample
> >>>>> index bcdaaa4..7d218e8 100644
> >>>>> --- a/conf/templates/distroless-master-config/local.conf.sample
> >>>>> +++ b/conf/templates/distroless-master-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>> a/conf/templates/distroless-scarthgap-config/local.conf.sample
> >>>> b/conf/templates/distroless-scarthgap-config/local.conf.sample
> >>>>> index 46cb253..b499977 100644
> >>>>> --- a/conf/templates/distroless-scarthgap-config/local.conf.sample
> >>>>> +++ b/conf/templates/distroless-scarthgap-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/conf/templates/poky-kirkstone-config/local.conf.sample
> >>>> b/conf/templates/poky-kirkstone-config/local.conf.sample
> >>>>> index e67385d..12eacfc 100644
> >>>>> --- a/conf/templates/poky-kirkstone-config/local.conf.sample
> >>>>> +++ b/conf/templates/poky-kirkstone-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/conf/templates/poky-master-config/local.conf.sample
> >>>> b/conf/templates/poky-master-config/local.conf.sample
> >>>>> index 1fe5688..e0112c7 100644
> >>>>> --- a/conf/templates/poky-master-config/local.conf.sample
> >>>>> +++ b/conf/templates/poky-master-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/conf/templates/poky-master-wip-config/local.conf.sample
> >>>> b/conf/templates/poky-master-wip-config/local.conf.sample
> >>>>> index 1fe5688..e0112c7 100644
> >>>>> --- a/conf/templates/poky-master-wip-config/local.conf.sample
> >>>>> +++ b/conf/templates/poky-master-wip-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/conf/templates/poky-scarthgap-config/local.conf.sample
> >>>> b/conf/templates/poky-scarthgap-config/local.conf.sample
> >>>>> index e67385d..12eacfc 100644
> >>>>> --- a/conf/templates/poky-scarthgap-config/local.conf.sample
> >>>>> +++ b/conf/templates/poky-scarthgap-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.00-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.00-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.00-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.00-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.01-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.01-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.01-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.01-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.01.00-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.01.00-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.01.00-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.01.00-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.02.00-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.02.00-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.02.00-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.02.00-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.00.00-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.00.00-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.00.00-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.00.00-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.01.00-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.01.00-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.01.00-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.01.00-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-gateway-10_00/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-gateway-10_00/local.conf.sample
> >>>>> index 6b91881..1149e85 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-gateway-10_00/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-gateway-10_00/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_06/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_06/local.conf.sample
> >>>>> index e4f04f3..a0d9b30 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_06/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_06/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_07/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_07/local.conf.sample
> >>>>> index 32a6cfb..9dd0dfa 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_07/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_07/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_06/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_06/local.conf.sample
> >>>>> index ee23c20..a83b490 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_06/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_06/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_07/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_07/local.conf.sample
> >>>>> index c29b416..e743654 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_07/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_07/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_04/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_04/local.conf.sample
> >>>>> index 34afc91..8096a3b 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_04/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_04/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_05/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_05/local.conf.sample
> >>>>> index f592ad9..31bfec8 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_05/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_05/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_07_06/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_07_06/local.conf.sample
> >>>>> index 0df5360..145aed2 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_07_06/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_07_06/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_08_06/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_08_06/local.conf.sample
> >>>>> index 5e39ec4..016f942 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_08_06/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_08_06/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_01_08_01/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_01_08_01/local.conf.sample
> >>>>> index 689e5d8..e627f36 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_01_08_01/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_01_08_01/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.00.00-am62xxsip-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.00.00-am62xxsip-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.00.00-am62xxsip-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.00.00-am62xxsip-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.00.00-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.00.00-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.00.00-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.00.00-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.01.00-am65xx-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.01.00-am65xx-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.01.00-am65xx-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.01.00-am65xx-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.01.00-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.01.00-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.01.00-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.01.00-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.01.00-legacy-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.01.00-legacy-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.01.00-legacy-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.01.00-legacy-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.02.00.08-am64x-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.02.00.08-am64x-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.02.00.08-am64x-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.02.00.08-am64x-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.03.05.02-legacy-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.03.05.02-legacy-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-09.03.05.02-legacy-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-09.03.05.02-legacy-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.09-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.09-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.09-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.09-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.10-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.10-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.10-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.10-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.09-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.09-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.09-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.09-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.10-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.10-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.10-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.10-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.00.07.04-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.00.07.04-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.00.07.04-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.00.07.04-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.00.07.04-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.00.07.04-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.00.07.04-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.00.07.04-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> ---
> >>>>
> >>>
> a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> >>>>> +++
> >>>>
> >>>
> b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/configs/arago-master-wip-config.txt
> >>>> b/configs/arago-master-wip-config.txt
> >>>>> index eb9c49d..165a3d1 100644
> >>>>> --- a/configs/arago-master-wip-config.txt
> >>>>> +++ b/configs/arago-master-wip-config.txt
> >>>>> @@ -5,7 +5,7 @@ bitbake,
> >>> https://git.openembedded.org/bitbake,master,HEAD
> >>>>> meta-arago,
> >>>>
> >>>
> https://git.yoctoproject.org/meta-arago,master-wip,HEAD,layers=meta-arago-distro:meta-arago-extras:meta-arago-test
> >>>>> #meta-browser,
> >>>>
> >>>
> https://github.com/OSSystems/meta-browser.git,master,HEAD,layers=meta-chromium
> >>>>> #meta-selinux,
> >>>> https://git.yoctoproject.org/meta-selinux,master,HEAD,layers=
> >>>>> -meta-qt5,
> https://github.com/meta-qt5/meta-qt5.git,master,HEAD,layers=
> >>>>> +meta-qt6,https://code.qt.io/yocto/meta-qt6.git,dev,HEAD,layers=
> >>>>> meta-virtualization,
> >>>> https://git.yoctoproject.org/meta-virtualization,master,HEAD,layers=
> >>>>> meta-openembedded,
> >>>>
> >>>
> https://git.openembedded.org/meta-openembedded,master,HEAD,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia
> >>>>> meta-ti,
> >>>>
> >>>
> https://git.yoctoproject.org/meta-ti,master-wip,HEAD,layers=meta-ti-extras:meta-beagle:meta-ti-bsp
> >>>>> diff --git
> >>>> a/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> >>>> b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> >>>>> index 5ced779..2dc2f5c 100644
> >>>>> ---
> a/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> >>>>> +++
> b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml
> >>>>> @@ -71,3 +71,4 @@ repos:
> >>>>> commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765"
> >>>>> layers:
> >>>>> meta:
> >>>>> +
> >>>>> diff --git
> >>>>
> >>>
> a/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> >>>>
> >>>
> b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> >>>>> index 405fa3b..351d9ea 100644
> >>>>> ---
> >>>>
> >>>
> a/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> >>>>> +++
> >>>>
> >>>
> b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml
> >>>>> @@ -83,3 +83,4 @@ repos:
> >>>>> url: "https://git.ti.com/git/edgeai/meta-edgeai.git";
> >>>>> branch: "scarthgap"
> >>>>> commit: "10.01.10.04"
> >>>>> +
> >>>>> diff --git a/kas/templates/local-arago64-v2.conf.yml
> >>>> b/kas/templates/local-arago64-v2.conf.yml
> >>>>> index c79388d..c6781be 100644
> >>>>> --- a/kas/templates/local-arago64-v2.conf.yml
> >>>>> +++ b/kas/templates/local-arago64-v2.conf.yml
> >>>>> @@ -15,7 +15,7 @@ local_conf_header:
> >>>>> # wiping and rebuilding you can preserve this directory to
> speed
> >>> up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> - DL_DIR = "${TOPDIR}/downloads"
> >>>>> + DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -28,7 +28,7 @@ local_conf_header:
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> >>>> files where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> - SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> + SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/kas/templates/local-arago64-v3.conf.yml
> >>>> b/kas/templates/local-arago64-v3.conf.yml
> >>>>> index b182483..3fa683e 100644
> >>>>> --- a/kas/templates/local-arago64-v3.conf.yml
> >>>>> +++ b/kas/templates/local-arago64-v3.conf.yml
> >>>>> @@ -15,7 +15,7 @@ local_conf_header:
> >>>>> # wiping and rebuilding you can preserve this directory to
> speed
> >>> up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> - DL_DIR = "${TOPDIR}/downloads"
> >>>>> + DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -28,7 +28,7 @@ local_conf_header:
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> >>>> files where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> - SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> + SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/kas/templates/local-poky-v2.conf.yml
> >>>> b/kas/templates/local-poky-v2.conf.yml
> >>>>> index 91995fe..075f535 100644
> >>>>> --- a/kas/templates/local-poky-v2.conf.yml
> >>>>> +++ b/kas/templates/local-poky-v2.conf.yml
> >>>>> @@ -15,7 +15,7 @@ local_conf_header:
> >>>>> # wiping and rebuilding you can preserve this directory to
> speed
> >>> up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> - DL_DIR = "${TOPDIR}/downloads"
> >>>>> + DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -28,7 +28,7 @@ local_conf_header:
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> >>>> files where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> - SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> + SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/kas/templates/local-poky-v3.conf.yml
> >>>> b/kas/templates/local-poky-v3.conf.yml
> >>>>> index 7368fb0..193a1ce 100644
> >>>>> --- a/kas/templates/local-poky-v3.conf.yml
> >>>>> +++ b/kas/templates/local-poky-v3.conf.yml
> >>>>> @@ -15,7 +15,7 @@ local_conf_header:
> >>>>> # wiping and rebuilding you can preserve this directory to
> speed
> >>> up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> - DL_DIR = "${TOPDIR}/downloads"
> >>>>> + DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -28,7 +28,7 @@ local_conf_header:
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> >>>> files where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> - SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> + SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/kas/templates/local-v2.conf.yml
> >>>> b/kas/templates/local-v2.conf.yml
> >>>>> index 3d666e4..f33fd45 100644
> >>>>> --- a/kas/templates/local-v2.conf.yml
> >>>>> +++ b/kas/templates/local-v2.conf.yml
> >>>>> @@ -15,7 +15,7 @@ local_conf_header:
> >>>>> # wiping and rebuilding you can preserve this directory to
> speed
> >>> up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> - DL_DIR = "${TOPDIR}/downloads"
> >>>>> + DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -28,7 +28,7 @@ local_conf_header:
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> >>>> files where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> - SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> + SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/kas/templates/local-v3.conf.yml
> >>>> b/kas/templates/local-v3.conf.yml
> >>>>> index 063b863..07eb5af 100644
> >>>>> --- a/kas/templates/local-v3.conf.yml
> >>>>> +++ b/kas/templates/local-v3.conf.yml
> >>>>> @@ -15,7 +15,7 @@ local_conf_header:
> >>>>> # wiping and rebuilding you can preserve this directory to
> speed
> >>> up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> - DL_DIR = "${TOPDIR}/downloads"
> >>>>> + DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -28,7 +28,7 @@ local_conf_header:
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> >>>> files where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> - SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> + SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/sample-files/local-arago64-v2.conf.sample
> >>>> b/sample-files/local-arago64-v2.conf.sample
> >>>>> index 7575b4b..8ad6f26 100644
> >>>>> --- a/sample-files/local-arago64-v2.conf.sample
> >>>>> +++ b/sample-files/local-arago64-v2.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/sample-files/local-arago64-v3.conf.sample
> >>>> b/sample-files/local-arago64-v3.conf.sample
> >>>>> index f2e9587..720ce11 100644
> >>>>> --- a/sample-files/local-arago64-v3.conf.sample
> >>>>> +++ b/sample-files/local-arago64-v3.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/sample-files/local-poky-v2.conf.sample
> >>>> b/sample-files/local-poky-v2.conf.sample
> >>>>> index e67385d..12eacfc 100644
> >>>>> --- a/sample-files/local-poky-v2.conf.sample
> >>>>> +++ b/sample-files/local-poky-v2.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/sample-files/local-poky-v3.conf.sample
> >>>> b/sample-files/local-poky-v3.conf.sample
> >>>>> index 1fe5688..e0112c7 100644
> >>>>> --- a/sample-files/local-poky-v3.conf.sample
> >>>>> +++ b/sample-files/local-poky-v3.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/sample-files/local-v2.conf.sample
> >>>> b/sample-files/local-v2.conf.sample
> >>>>> index 46cb253..b499977 100644
> >>>>> --- a/sample-files/local-v2.conf.sample
> >>>>> +++ b/sample-files/local-v2.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/sample-files/local-v3.conf.sample
> >>>> b/sample-files/local-v3.conf.sample
> >>>>> index bcdaaa4..7d218e8 100644
> >>>>> --- a/sample-files/local-v3.conf.sample
> >>>>> +++ b/sample-files/local-v3.conf.sample
> >>>>> @@ -10,7 +10,7 @@ CONF_VERSION = "2"
> >>>>> # wiping and rebuilding you can preserve this directory to speed up
> >>>> this part
> >>>>> # of subsequent builds. This directory is safe to share between
> >>>> multiple builds
> >>>>> # on the same machine too.
> >>>>> -DL_DIR = "${TOPDIR}/downloads"
> >>>>> +DL_DIR = "${TOPDIR}/../downloads"
> >>>>>
> >>>>> #
> >>>>> # Where to place shared-state files
> >>>>> @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads"
> >>>>> # regenerate from these files if no changes were made to the
> >>>> configuration.
> >>>>> # If changes were made to the configuration, only shared state
> files
> >>>> where the
> >>>>> # state was still valid would be used (done using checksums).
> >>>>> -SSTATE_DIR = "${TOPDIR}/build/sstate-cache"
> >>>>> +SSTATE_DIR = "${TOPDIR}/sstate-cache"
> >>>>>
> >>>>> #
> >>>>> # Shared-state files from other locations
> >>>>> diff --git a/src/bin/convert.pl b/src/bin/convert.pl
> >>>>> index 2787b86..42b9c2c 100755
> >>>>> --- a/src/bin/convert.pl
> >>>>> +++ b/src/bin/convert.pl
> >>>>> @@ -501,7 +501,7 @@ sub convert_local_conf_template
> >>>>> {
> >>>>> chomp($lpLine);
> >>>>>
> >>>>> - $lpLine =~ s/OEBASE/TOPDIR/;
> >>>>> + $lpLine =~ s/OEBASE/TOPDIR\/\.\./;
> >>>>> $lpLine =~ s/^MACHINE/#MACHINE/;
> >>>>>
> >>>>> $lpLine =~ s/&/&/g;
> >>>>> diff --git a/src/templates/local-arago64-v2.conf.xml
> >>>> b/src/templates/local-arago64-v2.conf.xml
> >>>>> index b49f702..d9d2ae7 100644
> >>>>> --- a/src/templates/local-arago64-v2.conf.xml
> >>>>> +++ b/src/templates/local-arago64-v2.conf.xml
> >>>>> @@ -11,7 +11,7 @@
> >>>>> <line># wiping and rebuilding you can preserve this directory
> to
> >>>> speed up this part</line>
> >>>>> <line># of subsequent builds. This directory is safe to share
> >>>> between multiple builds</line>
> >>>>> <line># on the same machine too.</line>
> >>>>> - <line>DL_DIR = "${TOPDIR}/downloads"</line>
> >>>>> + <line>DL_DIR = "${TOPDIR}/../downloads"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Where to place shared-state files</line>
> >>>>> @@ -24,7 +24,7 @@
> >>>>> <line># regenerate from these files if no changes were made to
> the
> >>>> configuration.</line>
> >>>>> <line># If changes were made to the configuration, only shared
> >>>> state files where the</line>
> >>>>> <line># state was still valid would be used (done using
> >>>> checksums).</line>
> >>>>> - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line>
> >>>>> + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Shared-state files from other locations</line>
> >>>>> diff --git a/src/templates/local-arago64-v3.conf.xml
> >>>> b/src/templates/local-arago64-v3.conf.xml
> >>>>> index 35d151f..c8a5d51 100644
> >>>>> --- a/src/templates/local-arago64-v3.conf.xml
> >>>>> +++ b/src/templates/local-arago64-v3.conf.xml
> >>>>> @@ -11,7 +11,7 @@
> >>>>> <line># wiping and rebuilding you can preserve this directory
> to
> >>>> speed up this part</line>
> >>>>> <line># of subsequent builds. This directory is safe to share
> >>>> between multiple builds</line>
> >>>>> <line># on the same machine too.</line>
> >>>>> - <line>DL_DIR = "${TOPDIR}/downloads"</line>
> >>>>> + <line>DL_DIR = "${TOPDIR}/../downloads"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Where to place shared-state files</line>
> >>>>> @@ -24,7 +24,7 @@
> >>>>> <line># regenerate from these files if no changes were made to
> the
> >>>> configuration.</line>
> >>>>> <line># If changes were made to the configuration, only shared
> >>>> state files where the</line>
> >>>>> <line># state was still valid would be used (done using
> >>>> checksums).</line>
> >>>>> - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line>
> >>>>> + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Shared-state files from other locations</line>
> >>>>> diff --git a/src/templates/local-poky-v2.conf.xml
> >>>> b/src/templates/local-poky-v2.conf.xml
> >>>>> index 72160c9..b45d6c2 100644
> >>>>> --- a/src/templates/local-poky-v2.conf.xml
> >>>>> +++ b/src/templates/local-poky-v2.conf.xml
> >>>>> @@ -11,7 +11,7 @@
> >>>>> <line># wiping and rebuilding you can preserve this directory
> to
> >>>> speed up this part</line>
> >>>>> <line># of subsequent builds. This directory is safe to share
> >>>> between multiple builds</line>
> >>>>> <line># on the same machine too.</line>
> >>>>> - <line>DL_DIR = "${TOPDIR}/downloads"</line>
> >>>>> + <line>DL_DIR = "${TOPDIR}/../downloads"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Where to place shared-state files</line>
> >>>>> @@ -24,7 +24,7 @@
> >>>>> <line># regenerate from these files if no changes were made to
> the
> >>>> configuration.</line>
> >>>>> <line># If changes were made to the configuration, only shared
> >>>> state files where the</line>
> >>>>> <line># state was still valid would be used (done using
> >>>> checksums).</line>
> >>>>> - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line>
> >>>>> + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Shared-state files from other locations</line>
> >>>>> diff --git a/src/templates/local-poky-v3.conf.xml
> >>>> b/src/templates/local-poky-v3.conf.xml
> >>>>> index 1e66478..fa313eb 100644
> >>>>> --- a/src/templates/local-poky-v3.conf.xml
> >>>>> +++ b/src/templates/local-poky-v3.conf.xml
> >>>>> @@ -11,7 +11,7 @@
> >>>>> <line># wiping and rebuilding you can preserve this directory
> to
> >>>> speed up this part</line>
> >>>>> <line># of subsequent builds. This directory is safe to share
> >>>> between multiple builds</line>
> >>>>> <line># on the same machine too.</line>
> >>>>> - <line>DL_DIR = "${TOPDIR}/downloads"</line>
> >>>>> + <line>DL_DIR = "${TOPDIR}/../downloads"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Where to place shared-state files</line>
> >>>>> @@ -24,7 +24,7 @@
> >>>>> <line># regenerate from these files if no changes were made to
> the
> >>>> configuration.</line>
> >>>>> <line># If changes were made to the configuration, only shared
> >>>> state files where the</line>
> >>>>> <line># state was still valid would be used (done using
> >>>> checksums).</line>
> >>>>> - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line>
> >>>>> + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Shared-state files from other locations</line>
> >>>>> diff --git a/src/templates/local-v2.conf.xml
> >>>> b/src/templates/local-v2.conf.xml
> >>>>> index 40f30e7..49e060c 100644
> >>>>> --- a/src/templates/local-v2.conf.xml
> >>>>> +++ b/src/templates/local-v2.conf.xml
> >>>>> @@ -11,7 +11,7 @@
> >>>>> <line># wiping and rebuilding you can preserve this directory
> to
> >>>> speed up this part</line>
> >>>>> <line># of subsequent builds. This directory is safe to share
> >>>> between multiple builds</line>
> >>>>> <line># on the same machine too.</line>
> >>>>> - <line>DL_DIR = "${TOPDIR}/downloads"</line>
> >>>>> + <line>DL_DIR = "${TOPDIR}/../downloads"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Where to place shared-state files</line>
> >>>>> @@ -24,7 +24,7 @@
> >>>>> <line># regenerate from these files if no changes were made to
> the
> >>>> configuration.</line>
> >>>>> <line># If changes were made to the configuration, only shared
> >>>> state files where the</line>
> >>>>> <line># state was still valid would be used (done using
> >>>> checksums).</line>
> >>>>> - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line>
> >>>>> + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Shared-state files from other locations</line>
> >>>>> diff --git a/src/templates/local-v3.conf.xml
> >>>> b/src/templates/local-v3.conf.xml
> >>>>> index d0c9d92..e300aaf 100644
> >>>>> --- a/src/templates/local-v3.conf.xml
> >>>>> +++ b/src/templates/local-v3.conf.xml
> >>>>> @@ -11,7 +11,7 @@
> >>>>> <line># wiping and rebuilding you can preserve this directory
> to
> >>>> speed up this part</line>
> >>>>> <line># of subsequent builds. This directory is safe to share
> >>>> between multiple builds</line>
> >>>>> <line># on the same machine too.</line>
> >>>>> - <line>DL_DIR = "${TOPDIR}/downloads"</line>
> >>>>> + <line>DL_DIR = "${TOPDIR}/../downloads"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Where to place shared-state files</line>
> >>>>> @@ -24,7 +24,7 @@
> >>>>> <line># regenerate from these files if no changes were made to
> the
> >>>> configuration.</line>
> >>>>> <line># If changes were made to the configuration, only shared
> >>>> state files where the</line>
> >>>>> <line># state was still valid would be used (done using
> >>>> checksums).</line>
> >>>>> - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line>
> >>>>> + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line>
> >>>>> <line></line>
> >>>>> <line>#</line>
> >>>>> <line># Shared-state files from other locations</line>
> >>>>> --
> >>>>> 2.17.1
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>> --
> >>>> Jonathan Cormier
> >>>> Senior Software Engineer
> >>>>
> >>>> Voice: 315.425.4045 x222
> >>>>
> >>>> http://www.CriticalLink.com
> >>>> 6712 Brooklawn Parkway, Syracuse, NY 13211
> >>>>
> >>>
> >>>
> >>> --
> >>> Jonathan Cormier
> >>> Senior Software Engineer
> >>>
> >>> Voice: 315.425.4045 x222
> >>>
> >>> http://www.CriticalLink.com <http://www.criticallink.com/>
> >>> 6712 Brooklawn Parkway, Syracuse, NY 13211
> >>> <https://twitter.com/Critical_Link>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >> --
> >> Jonathan Cormier
> >> Senior Software Engineer
> >>
> >> Voice: 315.425.4045 x222
> >>
> >> http://www.CriticalLink.com <http://www.criticallink.com/>
> >> 6712 Brooklawn Parkway, Syracuse, NY 13211
> >> <https://twitter.com/Critical_Link>
> >>
> >>
> >>
> >>
> >>
> >
> >
>
> --
> Ryan Eatmon [email protected]
> -----------------------------------------
> Texas Instruments, Inc. - LCPD - MGTS
>
--
Jonathan Cormier
Senior Software Engineer
Voice: 315.425.4045 x222
http://www.CriticalLink.com <http://www.criticallink.com/>
6712 Brooklawn Parkway, Syracuse, NY 13211
<https://twitter.com/Critical_Link>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#15917):
https://lists.yoctoproject.org/g/meta-arago/message/15917
Mute This Topic: https://lists.yoctoproject.org/mt/111311276/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
