OK - sent that one too early: My testing so far:
U-boot: - Boot kernel from FAT filesystem on SD Card (standard Yocto/meta-fsl method) - Serial port TFTP and networking works, I'm fairly sure. But I have not been able to test it with this build. Kernel: - Serial port - USB host port works with mass storage, wifi, and HID devices - Network port - Both microSD interfaces Image built: core-image-minimal To do: - HDMI, graphics, VPU, etc. On Sat, Feb 23, 2013 at 2:38 PM, John Weber <[email protected]> wrote: > I was able to spend a good amount of free time working on this during the > week this week. > > The patchset I just send includes kernel support, u-boot support, and > machine conf support for Wandboard Dual. I don't have a Wandboard Solo, so > I'm unable to work on that right now. I do think that there could be a > significant difference because from what I can gather iomux support in Solo > is very different from Dual Lite, but very similar to Quad. > > The u-boot patch works with the latest u-boot-imx in master, but I suspect > that it also will apply just fine onto danny. > > The kernel patch works with the latest kernel in master (FSL SDK 1.1.0), > and I also suspect that it should apply onto Danny (12.09.01) but I have > not tried it. > > To build for Wandboard, you have to set MACHINE ??= 'wandboard-dual' in > your local.conf > > My testing so far: > > U-boot: > - > >
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
