Hi, Eric, Thank you for the hint.
>> Does your Rev D board have 1.2 silicon? >> You can see this during U-Boot startup: >> CPU: Freescale i.MX6Q rev1.2 at 792 MHz Yes. I can see the message. Also, when I using the kernel 3.0.35-gb0b02db-dirty, the debug message shows "CPU identified as i.MX6Q, silicon rev 1.2". But, in 3.4.34 kernel, I couldn't find the mesage. Is there any initalization code for "i.MX6Q, silicon rev 1.2". Thanks again. Best Regards, Shinkyu. 2013/5/4 Eric Nelson <[email protected]> > On 05/02/2013 10:32 PM, Shinkyu Kang wrote: > >> Using IMX6Q SABRE Lite Ev. Board (Boundary Device) Rev. C, >> the kernel 3.4.34 works correctly, but Rev D doesn't work. >> What is the deferences between Rev. C and Rev. D. of hardware? >> Best Regards, >> Shinkyu >> > > Hi Shinkyu, > > Thinking about this, it seems that a CPU revision change is > more likely to be an issue than the board rev. > > Does your Rev D board have 1.2 silicon? > > You can see this during U-Boot startup: > CPU: Freescale i.MX6Q rev1.2 at 792 MHz > > Please advise, > > > Eric > >
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
