Hi Zahid, I tried to boot(ramboot) p2020rdb with all images built by SDK 1.3.2, the board can boot up normally. The boot log is attached.
Please use the u-boot provided by SDK 1.3.2 to try again, if the issue insists, please privide more details on how your images were built and the steps of loading image, full boot log is also helpful. Best Regards, Zhenhua From: [email protected] [mailto:[email protected]] On Behalf Of Zahid Hussain Sent: Tuesday, May 28, 2013 10:24 PM To: [email protected] Cc: Abdul Rasheed; Rakesh Khemani Subject: [meta-freescale] Help!!! Bad initab entry at line 5 Hi, I am was trying to boot the Freescale p2020rdb board with uImage, ext2 rootfs minimal image, and dtb obtained by building the Qoriq-1.3.2 freescale yocto SDK. But while I load the uImage, rootfs and dtb through the tftp server and try to boot the p2020rdb board, I get the following error Bad inittab entry at line 5 can't open /dev/si: No such file or directory can't open /dev/~~: No such file or directory can't open /dev/l0: No such file or directory can't open /dev/l1: No such file or directory can't open /dev/l2: No such file or directory can't open /dev/l3: No such file or directory can't open /dev/l4: No such file or directory can't open /dev/l5: No such file or directory can't open /dev/l6: No such file or directory can't open /dev/z6: No such file or directory FYI, I am using U-Boot 2009.11 (Oct 29 2010 - 00:19:50) bootloader and the u-boot environment variables are follows bootcmd=setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:r ramboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs; tftp $ramdiskaddr $ramdiskfile;tftp $lor nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netr bootdelay=10 baudrate=115200 loads_echo=1 rootpath=/opt/nfsroot hostname=P2020RDB bootfile=uImage loadaddr=1000000 netdev=eth0 uboot=u-boot.bin loadaddr=1000000 tftpflash=tftpboot $loadaddr $uboot; protect off 0xeff80000 +$filesize; erase 0xeff80000 +$filesize; cp.b $loadaddr 0xeff800e consoledev=ttyS0 ramdiskaddr=2000000 ramdiskfile=rootfs.ext2.gz.uboot fdtaddr=c00000 fdtfile=p2020rdb.dtb bdev=sda1 hwconfig=esdhc jffs2nor=mtdblock3 norbootaddr=ef080000 norfdtaddr=ef040000 jffs2nand=mtdblock9 nandbootaddr=200000 nandfdtaddr=100000 nandimgsize=400000 nandfdtsize=100000 usb_phy_type=ulpi vscfw_addr=ef000000 othbootargs=ramdisk_size=700000 cache-sram-size=0x10000 usbfatboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs; usb start;fatload usb 0:2 $loadaddr r usbext2boot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs; usb start;ext2load usb 0:4 $loadaddr norboot=setenv bootargs root=/dev/$jffs2nor rw console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;bootm $norbootaddr nandboot=setenv bootargs root=/dev/$jffs2nand rw rootfstype=jffs2 console=$consoledev,$baudrate $othbootargs;nand read 20000; sdboot=setenv bdev mmcblk0p2;setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;mmci; ethaddr=00:04:9F:02:00:FD eth1addr=00:04:9F:02:01:FD eth2addr=00:04:9F:02:02:FD eth3addr=00:04:9F:02:03:FD eth4addr=00:04:9F:02:04:FD eth5addr=00:04:9F:02:05:FD serverip=192.168.1.10 ipaddr=192.168.1.1 gatewayip=192.168.1.10 ethact=eTSEC1 bootargs=root=/dev/sda1 rw rootdelay=30 console=ttyS0,115200 ramdisk_size=700000 cache-sram-size=0x10000 Environment size: 2871/8188 bytes I would request you to please look in to the issue and help me understand and solve the issue. Regards, Zahid ________________________________ The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. L&T Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail"
p2020rdb_boot.log
Description: p2020rdb_boot.log
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
