On 27 Jun 2013, at 17:08, Jeff Osier-Mixon wrote: > Forwarding to meta-freescale (and I highly recommend joining this > list, c/o https://lists.yoctoproject.org)
Thanks. I've just added myself to the list as well. > > ---------- Forwarded message ---------- > From: Chris Tapp <opensou...@keylevel.com> > Date: Thu, Jun 27, 2013 at 12:54 AM > Subject: [yocto] Problems building core-image-minimal for > meta-fsl-asm-extra / 'wandboard-dual' > To: Yocto Discussion Mailing List <yo...@yoctoproject.org> > > > I'm trying to build core-image-minimal for the 'wandboard-dual' > machine from meta-fsl-arm extra > (https://github.com/Freescale/meta-fsl-arm-extra). > > The README for that layer states that it depends on > git.openembedded.org/openembedded-core and > git.yoctoproject.org/meta-fsl-arm, both at branch 'danny' and revision > 'HEAD'. > > So, my bblayers looks like: > > LCONF_VERSION = "6" > > BBPATH = "${TOPDIR}" > BBFILES ?= "" > > BBMASK = "udev_.*\.bbappend$" > > BBLAYERS ?= " \ > /media/SSD-RAID/poky-git/meta \ > /media/SSD-RAID/poky-git/meta-yocto \ > /media/SSD-RAID/poky-git/meta-yocto-bsp \ > /media/SSD-RAID/meta-fsl-arm-git \ > /media/SSD-RAID/meta-fsl-arm-extra-git \ > " > > (The -git just reminds me that I'm using git repos!). > > To (try and) make sure I have the correct branches I've run: > > git checkout origin/danny --- for meta-fsl-arm > > and > > git checkout origin/master --- for meta-fsl-arm-extra > > The dependencies listed in the README for origin/danny in meta-fsl-arm > look to fit in with the above. > > I've also selected a 'danny' branch within my 'poky' repo: > > git checkout danny-8.0.2 > > I've then built: > > bitbake core-image-minimal > > However, I'm getting an error in u-boot-fslc: > > ERROR: Function failed: do_compile (see > /media/SSD-RAID/build-danny-wandboard/tmp/work/wandboard_dual-poky-linux-gnueabi/u-boot-fslc-v2012.10-r4/temp/log.do_compile.31641 > for further information) > ERROR: Logfile of failure stored in: > /media/SSD-RAID/build-danny-wandboard/tmp/work/wandboard_dual-poky-linux-gnueabi/u-boot-fslc-v2012.10-r4/temp/log.do_compile.31641 > Log data follows: > | DEBUG: Executing shell function do_compile > | NOTE: make -j 16 CROSS_COMPILE=arm-poky-linux-gnueabi- > CC=arm-poky-linux-gnueabi-gcc > --sysroot=/media/SSD-RAID/build-danny-wandboard/tmp/sysroots/wandboard-dual > wandboard_dl_config > | make: *** No rule to make target `wandboard_dl_config'. Stop. > | make: *** [wandboard_dl_config] Error 1 > | ERROR: oe_runmake failed > | ERROR: Function failed: do_compile (see > /media/SSD-RAID/build-danny-wandboard/tmp/work/wandboard_dual-poky-linux-gnueabi/u-boot-fslc-v2012.10-r4/temp/log.do_compile.31641 > for further information) > ERROR: Task 68 > (/media/SSD-RAID/meta-fsl-arm-git/recipes-bsp/u-boot/u-boot-fslc_2012.10.bb, > do_compile) failed with exit code '1' > > Can anyone point out where I've gone wrong? > > Chris Tapp > > opensou...@keylevel.com > www.keylevel.com > > > > _______________________________________________ > yocto mailing list > yo...@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > > -- > Jeff Osier-Mixon http://jefro.net/blog > Yocto Project Community Manager @Intel http://yoctoproject.org Chris Tapp opensou...@keylevel.com www.keylevel.com _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale