Hi, On 22/08/2013 12:19, Eric Bénard wrote: > Hi Alexandre, > > Le Thu, 22 Aug 2013 12:14:05 +0200, > Alexandre Belloni <[email protected]> a écrit : > >> From chapter 12.11.1 of the i.MX28 Applications Processor Reference >> Manual, Rev. 1, 2010, a Boot Control Block is needed when booting from >> an SD/MMC card. The mx28_bcb.py utility will generate and write the BCB >> to a file, it will also write the provided bootstream. >> >> Signed-off-by: Alexandre Belloni <[email protected]> >> --- >> recipes-bsp/mx28-bcb/files/COPYING | 340 >> +++++++++++++++++++++++++++++++++ >> recipes-bsp/mx28-bcb/files/mx28_bcb.py | 56 ++++++ >> recipes-bsp/mx28-bcb/mx28-bcb_1.bb | 21 ++ >> 3 files changed, 417 insertions(+) >> create mode 100644 recipes-bsp/mx28-bcb/files/COPYING >> create mode 100755 recipes-bsp/mx28-bcb/files/mx28_bcb.py >> create mode 100644 recipes-bsp/mx28-bcb/mx28-bcb_1.bb >> >> diff --git a/recipes-bsp/mx28-bcb/files/COPYING >> b/recipes-bsp/mx28-bcb/files/COPYING >> new file mode 100644 >> index 0000000..6d45519 >> --- /dev/null >> +++ b/recipes-bsp/mx28-bcb/files/COPYING > .../... >> +LICENSE = "GPLv2" >> +LIC_FILES_CHKSUM = "file://COPYING;md5=12f884d2ae1ff87c09e5b7ccc2c4ca7e" >> + > LIC_FILES_CHKSUM = > "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6" > > and you can avoid to include COPYING in the recipe (md5 are differents > because the files have different layout but content is the same). > > Eric
Oh, right, I looked at it bit and I couldn't find it quickly enough and ended up copying it from an example. Thanks ! -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
