Dear Otavio Salvador, > On Thu, Aug 22, 2013 at 11:41 AM, Alexandre Belloni > > <[email protected]> wrote: > > From chapter 12.11.1 of the i.MX28 Applications Processor Reference > > Manual, Rev. 1, 2010, a Boot Control Block is needed when booting from > > an SD/MMC card. The mx28_bcb.py utility will generate and write the BCB > > to a file, it will also write the provided bootstream. > > > > Signed-off-by: Alexandre Belloni <[email protected]> > > --- > > > > recipes-bsp/mx28-bcb/files/mx28_bcb.py | 56 > > ++++++++++++++++++++++++++++++++++ recipes-bsp/mx28-bcb/mx28-bcb_1.0.bb > > | 20 ++++++++++++ > > 2 files changed, 76 insertions(+) > > create mode 100755 recipes-bsp/mx28-bcb/files/mx28_bcb.py > > create mode 100644 recipes-bsp/mx28-bcb/mx28-bcb_1.0.bb > > > > diff --git a/recipes-bsp/mx28-bcb/files/mx28_bcb.py > > b/recipes-bsp/mx28-bcb/files/mx28_bcb.py new file mode 100755 > > index 0000000..ea2038b > > --- /dev/null > > +++ b/recipes-bsp/mx28-bcb/files/mx28_bcb.py > > @@ -0,0 +1,56 @@ > > I'd put your copyright here as well.
Why do you not use mxsboot tool from U-Boot instead of re-inventing the wheel? Best regards, Marek Vasut _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
