On 08/29/2013 01:09 PM, Otavio Salvador wrote:
On Tue, Aug 27, 2013 at 3:52 PM, Eric Nelson
<[email protected]> wrote:
This patch updates U-Boot and the boot script to the latest production
version as described in this post:
http://boundarydevices.com/u-boot-2013-07-release/
For Yocto users, it also adds support for processor and memory
configurations other than the standard Quad-core/1GB option.
To build U-Boot for other CPU or memory combinations, you can set
the UBOOT_MACHINE variable in your local.conf according to the
following table:
Processor Memory Configuration
-------------- ------ --------------------
i.MX6Quad/Dual 1GB nitrogen6q_config
i.MX6Quad/Dual 2GB nitrogen6q2g_config
i.MX6Dual-Lite 1GB nitrogen6dl_config
i.MX6Dual-Lite 2GB nitrogen6dl2g_config
i.MX6Solo 512MB nitrogen6s_config
i.MX6Solo 1GB nitrogen6s1g_config
This patch also updates the boot script to allow support
for device-tree-enabled kernels in preparation for a 3.5.7
alpha release.
If a device-tree binary (imx6q_sabrelite.dtb or imx6q_nitrogen6x.dtb)
is found in the root directory of the boot (p1) partition, it
will be passed to the kernel.
Signed-off-by: Eric Nelson <[email protected]>
Thanks by doing this, comment below:
...
--- a/recipes-bsp/u-boot/u-boot-script-boundary_git.bb
+++ b/recipes-bsp/u-boot/u-boot-script-boundary_git.bb
@@ -5,9 +5,8 @@ DEPENDS = "u-boot-mkimage-native"
PV = "v2013.01+git${SRCPV}"
-SRCREV = "d6b05d35b8b29392e71fdd8fa43d5cb8bd4fe276"
-SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git \
- file://nitrogen6x-bootscript-modify-for-use-with-the-Yocto.patch"
+SRCREV = "f89bc066db0569008418fac1a0408a9a57f2232f"
+SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git"
You forgot to remove the patch file. I fixed it while merging it ;-)
Thanks Otavio.
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
