Hello Daiane, thanks for your reply. I have checked and my configuration already have package iproute2. I've checked in defconfig and all config related to FLEXCAN are setted to "yes" I don't know where to look.
There are someone with can experience on imx5? Thanks so much! -----Messaggio originale----- Da: Daiane Angolini [mailto:[email protected]] Inviato: lunedì 2 settembre 2013 14:30 A: Simone Cc: <[email protected]> Oggetto: Re: [meta-freescale] canbus interface issue on imx536 On 09/02/2013 07:26 AM, Simone wrote: > Dear All, > > Im trying to build an image with CAN support for imx536 processor. > > Ive added canutils and libsocketcan to my .bb image file and re > built the image successfully. > > Now, Im trying to test the interface, but Im encountering some problems. > > Here below the results of the setup functions: > > *CMD: ip link set can0 type can bitrate 500000** > *RESULT: ip: either "dev" is duplicate, or "bitrate" is garbage > > ** > > *CMD: ifconfig can0 up** > *RESULT: ifconfig: SIOCGIFFLAGS: No such device > > I saw that *ip *command is under */bin*instead of */sbin* where is > actually located busybox. Is this correct? I *almost* remember something regarding the package iproute2 and can. Do you have this package into your image? Could you, please take a look on this? Do you know if you need to re-configure buxybox to include some can support? > > Ive already copied the symlink to *ip* in */sbin*but with no > difference.__ > > Anyone have experience with canbus on imx53? I'm sorry, I don't have any experience with can.... all my mental links are from what I heard from imx-community threads. > > Thanks > > Regards > > > > _______________________________________________ > meta-freescale mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-freescale > -- Daiane _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
