>I'm tryng to build Freescale Yocto Image following "Freescale Yocto Project >Tutorial" instructions. >If I use master (or master-next) repository's branch to init repo: > >fsl-community-bsp $ repo init \ >-u https://github.com/Freescale/fsl-community-bsp-platform \ >-b master > >when I bitbake an image, for example : > >build $ bitbake core-image-minimal > >bitbake fails and displays following output: > >WARNING: Variable sysroot_stage_all contains tabs, please remove these >(/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ >linux-fslc_3.12.bb)| ETA: 00:00:19 >NOTE: Error during finalise of >/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ >linux-fslc_3.12.bb >ERROR: ExpansionError during parsing >/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ >linux-fslc_3.12.bb: Failure expanding variable sysroot_stage_all: >IndentationError: unexpected indent (<string>, line 4) >WARNING: Variable sysroot_stage_all contains tabs, please remove these >(/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ >linux-imx_3.0.35.bb) >NOTE: Error during finalise of >/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ >linux-imx_3.0.35.bb >WARNING: Variable sysroot_stage_all contains tabs, please remove these >(/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ >linux-imx_3.5.7.bb) >NOTE: Error during finalise of >/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ >linux-imx_3.5.7.bb > >Summary: There were 3 WARNING messages shown. >Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > >Note, if I use dora repository's branch to init repo, all the task are >executed successfully and bitbake generates required images. > >Can anyone help me to solve this issue ? > > >Thanks. >Regards >Fabio
I'm having the same issue with this after doing 'repo sync' today. I managed to get rid of some of the warnings by taking indents out from sources/meta-fsl-arm/recipes-kernel/linux/linux-imx.inc at the 'sysroot_stage_all_append()' but still having issues with the error. Any idea how to solve the error/new patch for this? Regards, Stu On 13 November 2013 13:11, <[email protected]> wrote: > Send meta-freescale mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.yoctoproject.org/listinfo/meta-freescale > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of meta-freescale digest..." > > > Today's Topics: > > 1. [meta-fsl-arm][PATCH 07/10] imx6qsabreauto.conf: Add > gpmi-weim DTS (Otavio Salvador) > 2. [meta-fsl-arm][PATCH 09/10] imx6slevk.conf: Add ldo device > tree (Otavio Salvador) > 3. [meta-fsl-arm][PATCH 08/10] imx6qsabresd.conf: Add ldo and > hdcp DTS (Otavio Salvador) > 4. [meta-fsl-arm][PATCH 10/10] imx6solosabresd.conf: Add ldo > device tree (Otavio Salvador) > 5. Re: [meta-fsl-arm-extra][PATCH 1/2] m28evk: Do not enable > GStreamer plugin (Marek Vasut) > 6. Re: [meta-fsl-arm-extra][PATCH 2/2] m53evk: Do not enable > GStreamer plugin (Marek Vasut) > 7. Bitbake generates error during parsing (Fabio Labruna) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 12 Nov 2013 22:00:29 -0200 > From: Otavio Salvador <[email protected]> > To: meta-freescale Mailing List <[email protected]> > Subject: [meta-freescale] [meta-fsl-arm][PATCH 07/10] > imx6qsabreauto.conf: Add gpmi-weim DTS > Message-ID: > <[email protected]> > > From: Lauren Post <[email protected]> > > ENGR00269945: ARM: imx6: add the secondary sabreauto dts for pin conflict > > The patch is to solve the pin conflicts between devices that are > currently added in imx6qdl-sabreauto dts file. It has ecspi1, i2c3, and > uart3 enabled while gpmi and weim disabled in the primary > imx6qdl-sabreauto.dtsi, and creates the secondary > imx6q/dl-sabreauto dts to have gpmi and weim enabled while others > disabled. Since usbh1 and usbotg depend on GPIO from max7310 on i2c3, > they have to be disabled as well in the secondary sabreauto dts files. > > Change-Id: I6338e60fa8c1622b2a73e99aa1e3def0a2555bc2 > Signed-off-by: Lauren Post <[email protected]> > --- > conf/machine/imx6qsabreauto.conf | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/conf/machine/imx6qsabreauto.conf > b/conf/machine/imx6qsabreauto.conf > index 4d367db..7455255 100644 > --- a/conf/machine/imx6qsabreauto.conf > +++ b/conf/machine/imx6qsabreauto.conf > @@ -7,7 +7,7 @@ require conf/machine/include/imx6sabreauto-common.inc > > SOC_FAMILY = "mx6:mx6q" > > -KERNEL_DEVICETREE = "imx6q-sabreauto.dtb" > +KERNEL_DEVICETREE = "imx6q-sabreauto.dtb imx6q-sabreauto-gpmi-weim.dtb" > > UBOOT_CONFIG ??= "sd" > UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard" > -- > 1.8.4.rc3 > > > > ------------------------------ > > Message: 2 > Date: Tue, 12 Nov 2013 22:00:31 -0200 > From: Otavio Salvador <[email protected]> > To: meta-freescale Mailing List <[email protected]> > Subject: [meta-freescale] [meta-fsl-arm][PATCH 09/10] imx6slevk.conf: > Add ldo device tree > Message-ID: > <[email protected]> > > From: Lauren Post <[email protected]> > > ENGR00277895: dts: ARM: imx6: add ldo-enable dts files > > Currently, we use different dts files to support ldo-bypass or > ldo-enable, then > we need add both dts files for the boards which can support ldo-bypass > mode(all > boards support ldo-enable at least). So for below boards we need add > ldo-enable > dts file so that we can use this to easily support ldo-enable mode: > 1)mx6q-sabresd board: ldo-bypass dts->mx6q-sabresd.dtb, > ldo-enable dts->mx6q-sabresd-ldo.dtb > 2)mx6q-sabresd board: ldo-bypass dts->mx6dl-sabresd.dtb, > ldo-enable dts->mx6dl-sabresd-ldo.dtb > 3)mx6sl-evk board: ldo-bypass dts->mx6sl-evk.dtb, > ldo-enable dts->mx6sl-evk-ldo.dtb > > Change-Id: I997bf896a3d3fde482fe9c120a92c16d49817adb > Signed-off-by: Lauren Post <[email protected]> > --- > conf/machine/imx6slevk.conf | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf > index da16c1d..990f48a 100644 > --- a/conf/machine/imx6slevk.conf > +++ b/conf/machine/imx6slevk.conf > @@ -8,6 +8,8 @@ include conf/machine/include/tune-cortexa9.inc > > SOC_FAMILY = "mx6:mx6sl" > > +KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-ldo.dtb" > + > UBOOT_MACHINE = "mx6slevk_config" > > SERIAL_CONSOLE = "115200 ttymxc0" > -- > 1.8.4.rc3 > > > > ------------------------------ > > Message: 3 > Date: Tue, 12 Nov 2013 22:00:30 -0200 > From: Otavio Salvador <[email protected]> > To: meta-freescale Mailing List <[email protected]> > Subject: [meta-freescale] [meta-fsl-arm][PATCH 08/10] > imx6qsabresd.conf: Add ldo and hdcp DTS > Message-ID: > <[email protected]> > > From: Lauren Post <[email protected]> > > ENGR00274059-02 ARM: Add new dts for imx6q/imx6dl SabreSD hdcp > > hdcp ddc pins conflict with i2c2, > add new dts file for imx6q and imx6dl SabreSD board, > enable hdcp and disable i2c2 in these dts files. > Remove hdmi pins property from mx6qdl-sabresd.dtsi. > > ENGR00279402-1 ARM: dts: imx6: add wdog reset source seclect in dts > > Some boards use another WDOG reset source to reboot system in ldo-bypass > mode. > We need add the property in board dts file so that we can easily know the > WDOG reset source currently. > > For Sabresd, WDOG1 for ldo-enable mode(WDOG event), WDOG2 for ldo-bypass > mode > (reset external pmic to trigger POR event). > For sl-evk board, there is no WDOG pin connected with external pmic as > Sabresd > , because mx6sl boot at 400Mhz. Then both ldo-enable and ldo-bypass mode > use > the common WDOG1 as reset source. > > ENGR00277895: dts: ARM: imx6: add ldo-enable dts files > > Currently, we use different dts files to support ldo-bypass or > ldo-enable, then > we need add both dts files for the boards which can support ldo-bypass > mode(all > boards support ldo-enable at least). So for below boards we need add > ldo-enable > dts file so that we can use this to easily support ldo-enable mode: > 1)mx6q-sabresd board: ldo-bypass dts->mx6q-sabresd.dtb, > ldo-enable dts->mx6q-sabresd-ldo.dtb > 2)mx6q-sabresd board: ldo-bypass dts->mx6dl-sabresd.dtb, > ldo-enable dts->mx6dl-sabresd-ldo.dtb > 3)mx6sl-evk board: ldo-bypass dts->mx6sl-evk.dtb, > ldo-enable dts->mx6sl-evk-ldo.dtb > > Change-Id: I38fb55249a002888c9da2c5e298acca089759876 > Signed-off-by: Lauren Post <[email protected]> > --- > conf/machine/imx6qsabresd.conf | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/conf/machine/imx6qsabresd.conf > b/conf/machine/imx6qsabresd.conf > index f0eff4a..ccac357 100644 > --- a/conf/machine/imx6qsabresd.conf > +++ b/conf/machine/imx6qsabresd.conf > @@ -7,7 +7,7 @@ require conf/machine/include/imx6sabresd-common.inc > > SOC_FAMILY = "mx6:mx6q" > > -KERNEL_DEVICETREE = "imx6q-sabresd.dtb" > +KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb > imx6q-sabresd-hdcp.dtb" > > UBOOT_CONFIG ??= "sd" > UBOOT_CONFIG[sd] = "mx6qsabresd_config,sdcard" > -- > 1.8.4.rc3 > > > > ------------------------------ > > Message: 4 > Date: Tue, 12 Nov 2013 22:00:32 -0200 > From: Otavio Salvador <[email protected]> > To: meta-freescale Mailing List <[email protected]> > Subject: [meta-freescale] [meta-fsl-arm][PATCH 10/10] > imx6solosabresd.conf: Add ldo device tree > Message-ID: > <[email protected]> > > From: Lauren Post <[email protected]> > > ENGR00277895: dts: ARM: imx6: add ldo-enable dts files > > Currently, we use different dts files to support ldo-bypass or > ldo-enable, then > we need add both dts files for the boards which can support ldo-bypass > mode(all > boards support ldo-enable at least). So for below boards we need add > ldo-enable > dts file so that we can use this to easily support ldo-enable mode: > 1)mx6q-sabresd board: ldo-bypass dts->mx6q-sabresd.dtb, > ldo-enable dts->mx6q-sabresd-ldo.dtb > 2)mx6q-sabresd board: ldo-bypass dts->mx6dl-sabresd.dtb, > ldo-enable dts->mx6dl-sabresd-ldo.dtb > 3)mx6sl-evk board: ldo-bypass dts->mx6sl-evk.dtb, > ldo-enable dts->mx6sl-evk-ldo.dtb > > Change-Id: I261c516495e3921fb1c2d8937d96fb6e3a23e87b > Signed-off-by: Lauren Post <[email protected]> > --- > conf/machine/imx6solosabresd.conf | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/conf/machine/imx6solosabresd.conf > b/conf/machine/imx6solosabresd.conf > index cfc30d2..5782268 100644 > --- a/conf/machine/imx6solosabresd.conf > +++ b/conf/machine/imx6solosabresd.conf > @@ -7,7 +7,7 @@ require conf/machine/include/imx6sabresd-common.inc > > SOC_FAMILY = "mx6:mx6s" > > -KERNEL_DEVICETREE = "imx6dl-sabresd.dtb" > +KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb" > > PREFERRED_PROVIDER_u-boot = "u-boot-imx" > PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx" > -- > 1.8.4.rc3 > > > > ------------------------------ > > Message: 5 > Date: Wed, 13 Nov 2013 01:08:09 +0100 > From: Marek Vasut <[email protected]> > To: Otavio Salvador <[email protected]> > Cc: meta-freescale Mailing List <[email protected]> > Subject: Re: [meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] m28evk: > Do not enable GStreamer plugin > Message-ID: <[email protected]> > Content-Type: Text/Plain; charset="us-ascii" > > Dear Otavio Salvador, > > > The kernel used for this board is based in the mainline kernel and > > does not provide the Freescale specific headers so we cannot build the > > GStreamer specific plugin. > > > > Change-Id: Icd9e08c3e774ea3a0df2c532ef52619d378a4fca > > Signed-off-by: Otavio Salvador <[email protected]> > > --- > > conf/machine/m28evk.conf | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/conf/machine/m28evk.conf b/conf/machine/m28evk.conf > > index abe7c03..76d5b3d 100644 > > --- a/conf/machine/m28evk.conf > > +++ b/conf/machine/m28evk.conf > > @@ -21,3 +21,6 @@ SERIAL_CONSOLE = "115200 ttyAMA0" > > KERNEL_IMAGETYPE = "uImage" > > > > MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa touchscreen" > > + > > +# Avoid adding gst-fsl-plugin as we use non-FSL kernel > > +MACHINE_GSTREAMER_PLUGIN_m28evk = "" > > Acked-by: Marek Vasut <[email protected]> > > Best regards, > Marek Vasut > > > ------------------------------ > > Message: 6 > Date: Wed, 13 Nov 2013 01:08:02 +0100 > From: Marek Vasut <[email protected]> > To: Otavio Salvador <[email protected]> > Cc: meta-freescale Mailing List <[email protected]> > Subject: Re: [meta-freescale] [meta-fsl-arm-extra][PATCH 2/2] m53evk: > Do not enable GStreamer plugin > Message-ID: <[email protected]> > Content-Type: Text/Plain; charset="us-ascii" > > Dear Otavio Salvador, > > > The kernel used for this board is based in the mainline kernel and > > does not provide the Freescale specific headers so we cannot build the > > GStreamer specific plugin. > > > > Change-Id: I382759bc05a74c638cb80dd61ce950bf896d33cf > > Signed-off-by: Otavio Salvador <[email protected]> > > --- > > conf/machine/m53evk.conf | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/conf/machine/m53evk.conf b/conf/machine/m53evk.conf > > index e2fbc56..20f0684 100644 > > --- a/conf/machine/m53evk.conf > > +++ b/conf/machine/m53evk.conf > > @@ -21,3 +21,6 @@ IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard" > > SERIAL_CONSOLE = "115200 ttymxc1" > > > > MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa touchscreen" > > + > > +# Avoid adding gst-fsl-plugin as we use non-FSL kernel > > +MACHINE_GSTREAMER_PLUGIN_m53evk = "" > > Acked-by: Marek Vasut <[email protected]> > > Best regards, > Marek Vasut > > > ------------------------------ > > Message: 7 > Date: Wed, 13 Nov 2013 14:10:55 +0100 > From: Fabio Labruna <[email protected]> > To: [email protected] > Subject: [meta-freescale] Bitbake generates error during parsing > Message-ID: > <CAANnQG11egUo3B03O=fw1T= > [email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > I'm tryng to build Freescale Yocto Image following "Freescale Yocto Project > Tutorial" instructions. > If I use master (or master-next) repository's branch to init repo: > > fsl-community-bsp $ repo init \ > -u https://github.com/Freescale/fsl-community-bsp-platform \ > -b master > > when I bitbake an image, for example : > > build $ bitbake core-image-minimal > > bitbake fails and displays following output: > > WARNING: Variable sysroot_stage_all contains tabs, please remove these > (/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ > linux-fslc_3.12.bb)| ETA: 00:00:19 > NOTE: Error during finalise of > /home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ > linux-fslc_3.12.bb > ERROR: ExpansionError during parsing > /home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ > linux-fslc_3.12.bb: Failure expanding variable sysroot_stage_all: > IndentationError: unexpected indent (<string>, line 4) > WARNING: Variable sysroot_stage_all contains tabs, please remove these > (/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ > linux-imx_3.0.35.bb) > NOTE: Error during finalise of > /home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ > linux-imx_3.0.35.bb > WARNING: Variable sysroot_stage_all contains tabs, please remove these > (/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ > linux-imx_3.5.7.bb) > NOTE: Error during finalise of > /home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/ > linux-imx_3.5.7.bb > > Summary: There were 3 WARNING messages shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > Note, if I use dora repository's branch to init repo, all the task are > executed successfully and bitbake generates required images. > > Can anyone help me to solve this issue ? > > Thanks. > Regards > Fabio > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131113/af53ce3a/attachment.html > > > > ------------------------------ > > _______________________________________________ > meta-freescale mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-freescale > > > End of meta-freescale Digest, Vol 13, Issue 34 > ********************************************** >
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
