Hi, Thanks for the feedback, I was thinking of posting there but hadn't got around to it yet. It's weird - I used to have it working with LTIB back a few months ago (well, almost a year) and I have a really similar configuration on the board now. Anyways, thanks for your help - hopefully someone in the imx-community will know. Regards, Morgan McKenize
> Date: Thu, 30 Jan 2014 08:59:43 -0200 > From: [email protected] > To: [email protected]; [email protected] > Subject: Re: [meta-freescale] SX-SDCAN > > On 30-01-2014 03:03, Morgan McKenzie wrote: > > Anyone? > > > > ------------------------------------------------------------------------ > > From: [email protected] > > To: [email protected] > > Subject: SX-SDCAN > > Date: Wed, 22 Jan 2014 18:42:54 -0700 > > > > Hi, > > > > I don't know if anyone else has near the same configuration as me - but > > I've been trying to enable the SX-SDCAN module for my imx6q sabre auto > > board. I've searched google and come up with a few things but none > > resulting in a fix, and am going to contact the manufacturer to see if > > they can help. > > > > I've built up an image based on core-image - I haven't configured the > > kernel but Atheros ath6kl support is enabled as a module. > > > > > > I was wondering if anyone has had experience with it (and more > > particularly success?) > > no > > > > > During the board's boot cycle it gives the following messages: > > > > ath6kl: Failed to get board file ath6k/AR6003/hw2.1.1/bdata.bin > > (-2), trying to find default board file. > > ath6kl: Failed to get default board file > > ath6k/AR6003/hw2.1.1/bdata.SD31.bin: -2 > > ath6kl: Failed to init ath6kl core > > ath6kl_sdio: probe of mmc1:0001:1 failed with error -2 > > > > And, these are the contents of /lib/firmware/ath6k/AR6003/hw2.1.1, so it > > seems to have the things I need there: > > > > athwlan.bin > > > > bdata.SD31.bin > > > > bdata.SD32.bin > > bdata.WB31.bin > > bdata.bin -> bdata.SD31.bin > > bdata.patch.bin > > endpointpoing.bin > > fw-2.bin > > fw-3.bin > > opt.bin > > > > > > Any help would be much appreciated! > > So, you do have the module (*.ko) and you do have the firmware. I think > you have everything needed. The only missing piece would be the wifi > tools to control it. > > What's your board? What changes did you make? > > This is not exactly the right place to get help on this kind of issue > (as it does not related with yocto). Have you tried to post your > question in imx-community? > > > Daiane > > > > > > Morgan McKenzie > > > > > > _______________________________________________ > > meta-freescale mailing list > > [email protected] > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > > > -- > Daiane
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
