Hello Wolfgang, On Wed, Feb 19, 2014 at 2:30 PM, Wolfgang Denk <[email protected]> wrote: > Dear Otavio, > > In message > <CAP9ODKr50h9hFFPRkeLO8iKkextuyNoxaBMS-nHc=5zvkbn...@mail.gmail.com> you > wrote: >> >> > Your conclusions are wrong. Nothing has changed in our repository. >> > The build error results from your own commit [1] where you added >> > incorrect (and obviously untested) code. > ... >> I think I tested this when added the branch information. It seems it > > I don't think so. The commit does not move around though different > branches. > >> has a tag pointing to the hash and I will check how to use it (BitBake >> has some issues to deal with the tags) but it would be nice if you or >> someone else at DENX might help on this as I don't own a m53evk board. > > I don't see why you would actually use any branch or tag information. > As you just learned, this is not reliable. Just refer to the commit > ID, and you are all fine.
This is required in current BitBake fetcher code and thus in master. This is new in 1.6 release. > As for help: I cannot see which help you would need to run a test > build. You can check yourself if it builds or fails. Remember, the > code was orking before you broke it. Sorry Wolfgang but you are wrong. As I state before this is need in master. Help? I do think someone supporting and doing regular tests would be good. If you were subscribed to the mailing list you'd know I sent another fix to make m53evk to build in Dora when using X11 which were failing and no one found it. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
