On Wed, Feb 26, 2014 at 5:37 PM, Gary Thomas <[email protected]> wrote:
> On 2014-02-26 05:03, Prasant J wrote: > > Hi, > > > > I'm using linux-3.0.35 on my custom hardware (uses imx6 quad) based on > sabresd platform. I'm using yocto root filesystem (this is a soft float > build). > > > > I want to force my system to use 100 mbps ethernet speed even if the > network supports 1000 mbps link. How can I enable this ? > > > > My custom hardware uses Micrel's Gigabit Ethernet PHY KSZ9021RNI. > > > > I can change the network speed (by ssh-ing into the linux system) using: > > ethtool -s eth0 autoneg off speed 100 > > but I want network speed of 100 mbps when network is initialized during > startup. > > > > Any inputs will be of help. > > If you are using init-ifupdown to manage the network, you can > change /etc/network/interfaces to look something like this: > > auto eth0 > iface eth0 inet dhcp > pre-up ethtool -s eth0 speed 100 duplex full autoneg off > Hi Gary, That will help. I guess the same will work when I configure staticip by modifying the /etc/network/interfaces file. I will try this one. Thanks once again! -Pj
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
