Hi Otavio. It works after boot (gateway is set), but when I toggle (down and up) the eth0 (changing HW address). Then the gateway is cleared and I have to set it again.
Best regards, Niklas On Mar 24, 2014 7:09 PM, "Otavio Salvador" <[email protected]> wrote: > Hello Niklas, > > On Mon, Mar 24, 2014 at 5:45 PM, Niklas Molin <[email protected]> > wrote: > > I'm trying to toggle the eth0 with ifconfig > > I noticed that it I couldn't access my board after that. > > After some more testing it seems like I can't access my board from a > > different subnetwork. > > So I did a route -nee (before and after eth0 down and up) and it seems > lie > > the gateway is gone. > > > > root@imx6qsabresd:~# route -nee > > Destination Gateway Genmask Flags MSS Window irtt > > Iface > > 0.0.0.0 192.168.55.1 0.0.0.0 UG 0 0 0 > > eth0 > > 192.168.55.0 0.0.0.0 255.255.255.0 U 0 0 0 > > eth0 > > root@imx6qsabresd:~# ifconfig eth0 down > > root@imx6qsabresd:~# ifconfig eth0 up > > > > When link is back: > > root@imx6qsabresd:~# route -nee > > Kernel IP routing table > > Destination Gateway Genmask Flags MSS Window irtt > > Iface > > 192.168.55.0 0.0.0.0 255.255.255.0 U 0 0 0 > > eth0 > > > > I did this on a SabreSD and also my custom board. > > > > Is there anything I'm missing in my setup? > > Did you set your /etc/network/interfaces accordingly? > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://code.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 >
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
