I am looking for the documentation for the ethadd variables in the u-boot of the T4240 machine.
Why is it that these values special: eth10addr=00:e0:0c:00:ae:0a eth11addr=00:e0:0c:00:ae:0b eth12addr=00:e0:0c:00:ae:0c eth13addr=00:e0:0c:00:ae:0d eth14addr=00:e0:0c:00:ae:0e eth15addr=00:e0:0c:00:ae:0f eth1addr=00:e0:0c:00:ae:01 eth2addr=00:e0:0c:00:ae:02 eth3addr=00:e0:0c:00:ae:03 eth4addr=00:e0:0c:00:ae:04 eth5addr=00:e0:0c:00:ae:05 eth6addr=00:e0:0c:00:ae:06 eth7addr=00:e0:0c:00:ae:07 eth8addr=00:e0:0c:00:ae:08 eth9addr=00:e0:0c:00:ae:09 ethact=e1000#0 ethaddr=00:e0:0c:00:ae:00 - I have booted the kernel with these variables and my machine doesn't seem to be identified by the network. I have checked the build with the pre built images that I downloaded from the freescale site. I have checked ALL network related issues and everything is just fine ( I connected my laptop with the EXACT same IP configuration and my laptop pings but not the board) I have checked the kernel logs for any errors and there seems to be no issues at all. Is there anything that Im missing. ( I configured the IP, in the usual ifconfig and route - to add gateway- commands)
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
