On 2014-06-10 12:08, John Weber wrote:
I'm using the 3.0.35 kernel on my SabreLite. I found that
once I plug in an HDMI monitor, the SGTL-5000 audio vanishes.
It stays missing, even when the board is reset (switch or
by reboot), until a power cycle.
Does the SGTL5000 share the same I2C bus with the HDMI I2C (DDC) port on the
SabreLite? If so, could the problem be that the DDC port is pulling the bus
down or otherwise
interfering with it?
No, they are on different I2C busses.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
