Hello Gnichi, On Thu, Jul 10, 2014 at 6:16 AM, Gnichi Mohamed <[email protected]> wrote: > I am new to this world and i am enjoying it for the past week. > I have the imx233 olinuxino maxi and decider to make a very tiny system for > it so i choose yocto. The other reason is that i am familiar with gentoo and > i thought maybe my experience with gentoo could help. > Well i am on my gentoo and i successfully built core-image-minimal with some > additional packages and i want to configure and recompile the kernel. so i > did > bitbake -c menuconfig linux-fslc > but some exception about python and other things that i couldn't follow. > Here is the exceptions http://pastebin.com/CBcLX1j1 > I have Gentoo x86_64,python2.7
Besides the information Trevor has asked, in his reply, I'd like to bring up the point that Yocto Project is not /tested/ in Gentoo. This does not mean it won't work. I use Yocto Project in Debian Sid (which is also not supported) and it works fine (most of time). Back to Gentoo; it seems there is a doc[1] where people document some pitfalls they overcome when using Gentoo as a host. It may be worth a look and check if all is covered. 1. http://wiki.gentoo.org/wiki/Yocto Another alternative is to try to use the BuildTools SDK[2] which is offered as a workaround for non-supported host systems. 2. https://www.yoctoproject.org/download/yocto-project-16-buildtools-sdk I hope it helps, -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
