On 2014-08-10 18:56, Sri Harsha Rentala wrote:
Hi,I am a novice with the yocto project and I am currently working on a thesis project in which I am facing an issue with the setup of a USB webcam on a SABRE lite board by Boundary devices. I have built the Minimal image 'core-image minimal' over which I have installed certain components and packages for which the list is given below. *OS*: Ubuntu 13.10 *Board*: Sabrelite rev-D by boundary devices *Kernel Version*: Image Name: Linux-3.10.17-1.0.0_ga+yocto+gca Image Type: ARM Linux Kernel Image (uncompressed) *Bitbake version*: 1.22.0 Machine name was changed to 'nitrogen6x'. *Additional applications installed*: Gstreamer-0.10, mongoose web server application, libav, openssh, imx-test, libxbee *Additional hardware used*: Logitech USB webcam When I try to access the webcam to capture video, I am unable to find the device. Basically, the image is unable to identify it as a webcam, but only as a USB device. The following was my terminal output root@nitrogen6x:~# usb 1-1.1: USB disconnect, device number 3 usb 1-1.1: new high-speed USB device number 4 using ci_hdrc root@nitrogen6x:~# gst-launch v4l2src ! mfw_v4lsink mxc_v4l_open: Mxc Camera no sensor ipu0/csi0 mxc_v4l_open: Mxc Camera no sensor ipu0/csi1 mxc_v4l_open: Mxc Camera no sensor ipu1/csi1 Unable to open /dev/fb0 -1mxc_v4l_open: Mxc Camera no sensor ipu0/csi0 get vscreen info failed. set color key failed. MFW_GST_V4LSINK_PLUGIN 3.0.11 build on Jul 30 2014 14:25:19. Setting pipeline to PAUSED ... ERROR: Pipeline doesn't want to pause. ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not open . Additional debug info: /home/harsha/fsl-community-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gn: system error: Resource temporarily unavailable Setting pipeline to NULL ... Total rendered:0 Freeing pipeline ... [--->FINALIZE v4l_sink I understand that the webcam is only being identified as a USB device which can be seen in the terminal output (in red) above. So how do I get the dongle to identify it properly? Do I have to install the USB driver for the webcam separately? (I looked up to find that we don't need to, but I am not sure). I appreciate any suggestions and directions here.
What Logitech camera are you trying to use (Logitech has tons of models, all slightly different)? Have you successfully used this camera with other Linux systems, e.g. your desktop? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
