Hello, I pushed following updates:
commit 032048c99e013b51ef141e0454c8fd9da12a3987 (HEAD, yocto/master, pending, ls1-zhenhua-v4) Author: Zhenhua Luo <[email protected]> Date: Thu Sep 4 12:33:19 2014 +0800 ls1021aqtwr.conf: Add machine conf for ls1021atwr * define the SOC_FAMILY * set UBOOT_CONFIG * configure kernel devicetree and defconfig * define options related to serial console Signed-off-by: Zhenhua Luo <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 2fbfc406d252ab545449920c496eb2d44277b80d Author: Zhenhua Luo <[email protected]> Date: Thu Sep 4 12:33:18 2014 +0800 ls1021aqds.conf: Add machine conf for ls1021aqds * define the SOC_FAMILY * set UBOOT_CONFIG * configure kernel devicetree and defconfig * define options related to serial console Signed-off-by: Zhenhua Luo <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 2d614c09d005799a228b0f99c8d325a573a36699 Author: Zhenhua Luo <[email protected]> Date: Thu Sep 4 12:33:17 2014 +0800 rcw: add recipes for Layerscape1 support The reset configuration word (RCW) manages the hardware configuration info for QorIQ targets, rcw is used by the preboot loader to begin system configuration. Signed-off-by: Zhenhua Luo <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit ecde2869a4911f694d54869050089e3766bb5b0a Author: Zhenhua Luo <[email protected]> Date: Thu Sep 4 12:33:16 2014 +0800 linux-ls1: Add kernel recipes for Layerscape1 support Signed-off-by: Zhenhua Luo <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit a7e9f553657957ec24e5df4ee499451703cd8297 Author: Zhenhua Luo <[email protected]> Date: Thu Sep 4 12:33:15 2014 +0800 u-boot-ls1: Add recipe for Layerscape1 support * u-boot-ls1-tools-native: provides the tcl script for endian swap * u-boot-ls1: the u-boot recipes for ls1021aqds and ls1021atwr support Signed-off-by: Zhenhua Luo <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit da738059d3b1e9c82cc897624fbeeb22a9cd11b2 Author: Zhenhua Luo <[email protected]> Date: Thu Sep 4 12:33:14 2014 +0800 ls-base.inc: Add base configuration for Layerspace1 support The base configuration file includes following major settings: * Freescale LS1 default providers * Default image type * Default tune type * Default machine features Signed-off-by: Zhenhua Luo <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit bfe1692c584a034b3fd5ab76361cff64181fb791 Author: Otavio Salvador <[email protected]> Date: Thu Sep 11 17:38:38 2014 -0300 u-boot-fslc: Update to 53cd36b revision This updates the 2014.07-based branch with more backports from the 2014.10 upcoming release. The following changes are included: 53cd36b imx: mx6slevk: Change to use generic board 987efad imx: mx6q/dlarm2: Change to use generic board 0207052 README.imximage: Fix the maximum DCD size 13e94fe imx: Fix build of mx6sxsabresd 318d1cd mx6sxsabresd: Add PCI support 919802d pcie_imx: Add mx6solox support 847d6ce mx6: imx-regs: Provide a structure for GPC registers f26e33b mx6qsabreauto: Remove imx6q-sabreauto.dts f22fd9d imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent e45540b arm: vf610: lpuart: disable FIFO on initializaton 11571b6 arm: vf610: lpuart: fix status register handling 09e81f4 mx6: Fix ECSPI typo in soc_boot_modes b8d5d42 imximage: Fix imximage IVT bug for EIM-NOR boot 228135e iMX6: Disable the L2 before chaning the PL310 latency 45108f1 tools: imximage: Fix the maximum DCD size for mx53/mx6 9f3f181 pci: add support for board_pci_fixup_dev function 4ecf3e6 arm: mx6: add get_cpu_type() b6faaf1 arm: mx6: ddr: fix cs0_end calculation 07917e7 arm: mx6: ddr: configure MMDC for slow_pd 66b2f14 arm: mx6: ddr: do not write into reserved bit b3f847e arm: mx6: ddr: cleanup eba02a9 i2c: imx: add macros to setup pads for multiple SoC types e50e740 sata: dwc_ahsata: implement sata_port_status a45361d compulab: eeprom: add support for defining eeprom i2c bus 8f82ddd mx6: add clock enabling functions 5305489 net: fec_mxc: Poll FEC_TBD_READY after polling TDAR d5e440b net: fec_mxc: Adjust RX DMA alignment for mx6solox fca8b5a usb: ci_udc: implement dfu_usb_get_reset 7baddea arm: Add missing .vectors section to linker scripts 324df11 arm: vf610: add NFC clock support 10c68b2 arm: vf610: add NFC pin mux 9bba571 ARM: Fix overflow in MMU setup 7be9add api: fix build without CMD_NET support 8a9e527 e1000: add i210 support dcd2c8c e1000: Implement dcache support Signed-off-by: Otavio Salvador <[email protected]> commit 55399e019633c0a6636c3733746d4b2af6ae76a6 Author: Neena Busireddy <[email protected]> Date: Tue Sep 9 21:06:45 2014 -0500 qtbase: Include Sololite changes. Sololite x11 backend only supports mesa software rendering GL but does not support GLES. Sololite non-x11 backends (fb, wayland and dfb) do not support GL and GLES. Change qtbase recipe to support sololite qt for all backends. Signed-off-by: Neena Busireddy <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 1ed2b27171c4d553cc84655af9a19f50c3084199 Author: Wang Zidan <[email protected]> Date: Fri Sep 12 16:34:13 2014 +0800 gstreamer1.0-plugins-base: Enable native video in playbin for i.MX SoCs GST_PLAY_FLAG_NATIVE_VIDEO means link decoder directly with video render, otherwise, software csc/resize/deinterlace plugins will be linked between them. For all i.MX chips, we should enable this flag, as the fsl renders has the capability to do csc/resize. Signed-off-by: Zidan Wang <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> Regards, -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
