On 12/02/2014 09:42 AM, Gary Thomas wrote: > On 2014-12-02 09:33, Eric Nelson wrote: >> On 12/02/2014 06:24 AM, Gary Thomas wrote: >>> On 2014-12-02 06:21, Gary Thomas wrote: >>>> On 2014-11-26 17:26, Gary Thomas wrote: >>>>> On 2014-11-26 12:26, Eric Nelson wrote: >>>>>> Hi Gary, >>>>>> >>>>> >>>>> <snip> >>>>> >>>>> Next problem - I have no video, neither with HDMI nor 7" LCD >>>>> Ideas? >>>>> >>>> >>>> Any progress with this (no video at all)? I've tried the >>>> latest Boundary Devices kernel (b76cf1c04) whose comment >>>> implies this should be fixed, but still no-go. >>>> >>> >>> For completeness, here are some relevant messages at boot: >>> >>> Kernel command line: enable_wait_mode=off >>> video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24 >>> video=mxcfb1:dev=lcd,CLAA-WVGA,if=R >>> GB666 video=mxcfb2:off video=mxcfb3:off fbmem=28M,10M >>> console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait root=/d >>> ev/mmcblk3p2 mxc_hdmi.only_cea=1 >>> >> >> What silicon version are you running? As mentioned in Gary Bisson's >> thread earlier, there are some known issues with TO 1.0 and HDMI. > > My SabreLite is rev 1.0 >
That explains it. Freescale seems to have dropped support (or at least stopped testing) TO 1.0 prior to the 3.10.x releases. >> >> <snip> >> >> These messages above match what Gary Bisson says he has a patch for... >> >> And I just pushed a patch for the RGB display error below: >>> mxc_sdc_fb fb.28: NO mxc display driver found! >> >> >> https://github.com/boundarydevices/linux-imx6/commit/0d7db21a8e6bc028209438ae3919907c177f348a >> > > Yes, I thought I already had that applied. I'll check again. > That's unlikely, since we haven't yet sent a patch to the list to update meta-fsl-arm-extra. In the mean-time, you'll need to do this by hand in the file meta-fsl-arm-extra/recipes-kernel/linux/linux-boundary_3.10.17.bb Regards, Eric -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
