The issue was resolved by manually updating the recipe to 0.10 as 0.9.9 gstreamer-imx-pugins do not support G2D. Thanks dv1.
But the meta-fsl-arm is failing during repo sync. Any particular reason for that failure. Could someone please post an example for the smartsync option of repo utility. Thanks repo sync results in the following error for meta-fsl-arm. /Data1/yocto/fsl-community-bsp$ repo sync Fetching project fsl-community-bsp-base Fetching project Documentation Fetching project meta-fsl-demos Fetching project meta-fsl-arm Fetching projects: 14% (1/7) Fetching project poky Fetching projects: 28% (2/7) Fetching project meta-openembedded Fetching projects: 42% (3/7) Fetching project meta-fsl-arm-extra Fetching projects: 85% (6/7) remote: Counting objects: 25, done. remote: Compressing objects: 100% (16/16), done. remote: Total 16 (delta 14), reused 0 (delta 0) Unpacking objects: 100% (16/16), done.
From git://git.yoctoproject.org/poky<http://git.yoctoproject.org/poky>
130958c..97d44bf master -> yocto/master Fetching projects: 100% (7/7), done. Traceback (most recent call last): File "/Data1/yocto/fsl-community-bsp/.repo/repo/main.py", line 500, in <module> _Main(sys.argv[1:]) File "/Data1/yocto/fsl-community-bsp/.repo/repo/main.py", line 476, in _Main result = repo._Run(argv) or 0 File "/Data1/yocto/fsl-community-bsp/.repo/repo/main.py", line 155, in _Run result = cmd.Execute(copts, cargs) File "/Data1/yocto/fsl-community-bsp/.repo/repo/subcmds/sync.py", line 675, in Execute project.Sync_LocalHalf(syncbuf) File "/Data1/yocto/fsl-community-bsp/.repo/repo/project.py", line 1204, in Sync_LocalHalf lost = self._revlist(not_rev(revid), HEAD) File "/Data1/yocto/fsl-community-bsp/.repo/repo/project.py", line 2241, in _revlist return self.work_git.rev_list(*a, **kw) File "/Data1/yocto/fsl-community-bsp/.repo/repo/project.py", line 2435, in rev_list p.stderr)) error.GitError: meta-fsl-arm rev-list (u'^7539a694f3d01f1ab5162bfee16b0327f827c4f7', 'HEAD', '--'): fatal: bad object 7539a694f3d01f1ab5162bfee16b0327f827c4f7 On 01/08/2015 12:37 PM, [email protected]<mailto:[email protected]> wrote: imxG2D plugins not getting build on IMX6 SABRE SD with Yocto Dizzy -- Regards, Subodh -- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. UFOMoviez India Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer *******************
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
