Looks good to me, Alfonso. I've applied it and tested it with wandcam
and gstreamer-1.0. Looks like I'm getting some sketchy problem that
results in a segfault when a gstreamer pipeline shuts down, but not
sure if that is due to this kernel or if it existed in previous
kernels (3.10.17 versions or 3.10.31).
:(
I just tested a fresh install and I'm getting the same error:
root@wandboard-quad:~# GST_DEBUG=*:3; gst-launch-1.0 -e imxv4l2src
capture-mode=4 fps-n=30 ! imxvpuenc_h264 bitrate=4096 ! h264parse !
mp4mux ! filesink location=video.mp4
...
EOS received - stopping pipeline...
Execution ended after 0:00:04.088140334
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Caught SIGSEGV
#0 0x76c72498 in waitpid () from /lib/libpthread.so.0
#1 0x76c9cb64 in g_on_error_stack_trace () from /usr/lib/libglib-2.0.so.0
#2 0x0000b4e0 in ?? ()
Spinning. Please run 'gdb gst-launch-1.0 1011' to continue debugging,
Ctrl-C to quit, or Ctrl-\ to dump core.
^C
Any ideas Otavio?
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
