Okay so I tried another sdcard and it booted. I thought I had already tried 2 different sdcards but maybe I just kept using the same one.
Now that I have it booting. I am still having issues with this kernel and usb. It's only detecting one of the usb ports. root@imx28evk:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Also when I putting a usb device. It is not being recognized. On Wed, Feb 11, 2015 at 7:37 AM, Mark Lane <[email protected]> wrote: > I have attached the output from minicom for the boot. It's complaining > that the 'card never left busy state'. I just recopied the image to the > flash drive so maybe I didn't properly unmount it because that is new. > Before it would just get to 'waiting for root device' and just sit there. > > On Wed, Feb 11, 2015 at 7:06 AM, Fabio Estevam <[email protected]> wrote: > >> Hi Mark, >> >> On Wed, Feb 11, 2015 at 9:41 AM, Mark Lane <[email protected]> >> wrote: >> > >> > I cannot seem to get a usable build using Yocto with either fslc-linux >> or >> > imx-linux. I can build a bootable kernel with imx-linux but USB is not >> > working. With fslc-linux (3.18), u-boot can load the kernel but the >> kernel >> > can't mount the ext3 file system. >> >> Could you share the whole log from U-boot until the point where the >> kernel does not find the rootfs when using the 3.18 kernel? >> >> Regards, >> >> Fabio Estevam >> > > > > -- > Mark Lane > Linux Systems Integrator > http://www.2100computerlane.net > 1-844-723-8112 * 1-289-448-5113 > -- Mark Lane Linux Systems Integrator http://www.2100computerlane.net 1-844-723-8112 * 1-289-448-5113
minicom3.out
Description: Binary data
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
