On 2015-05-08 16:52, Eric Nelson wrote:
Hi Gary,
On 05/08/2015 03:47 PM, Gary Thomas wrote:
On 2015-05-08 06:49, Otavio Salvador wrote:
On Thu, Apr 30, 2015 at 11:41 PM, Nikolay Dimitrov <[email protected]>
wrote:
...
So I have 2 questions:
1. The probability that someone knows what's the actual issue is close
to minus infinity, but at least did someone observed similar behavior?
If needed, I can snap photos to visually demonstrate the issue.
I have customers using it in Dizzy and I didn't see the error. Please
check today's meta-browser as I merged a fix from Khem which address
some installation issues.
2. Chromium on sabresd & fido gave me at least 1 interesting warning
about GPU being frozen and pending reset in 10s. I haven't seen such
error, but this makes me highly concerned about porting my stuff to
fido. Did someone see such error messages?
Prabhu?
I just rebuilt Chrome with the latest meta-browser (and meta-fsl-arm-*)
There are many rendering problems on the Google main page and then I
get these errors:
[872:872:0508/165904:ERROR:image_metadata_extractor.cc(111)] Couldn't
load libexif.
[896:896:0508/165907:ERROR:sandbox_linux.cc(301)] InitializeSandbox()
called with multiple threads in process gpu-process
Fontconfig warning: FcPattern object size does not accept value 9(i)
[958:958:0508/165913:ERROR:image_metadata_extractor.cc(111)] Couldn't
load libexif.
[870:890:0508/165930:ERROR:channel.cc(258)] RawChannel read error
(connection broken)
[896:906:0508/165943:ERROR:gpu_watchdog_thread.cc(253)] The GPU process
hung. Terminating after 10000 ms.
[870:870:0508/165943:ERROR:gpu_channel_host.cc(185)] Failed to send
GpuChannelMsg_CreateOffscreenCommandBuffer.
[870:870:0508/165943:ERROR:webgraphicscontext3d_command_buffer_impl.cc(230)]
Failed to initialize command buffer.
[1005:1006:0508/165955:ERROR:gpu_watchdog_thread.cc(253)] The GPU
process hung. Terminating after 10000 ms.
getrlimit(RLIMIT_NOFILE) failed
getrlimit(RLIMIT_NOFILE) failed
This is on a board using the Boundary Devices 3.10.53 kernel
(I don't have a board here that runs a "pure" FSLC kernel)
but as far as I can tell the BD kernel is the FSLC kernel
with some of their own patches, mostly to do with cameras.
Was this on master or fido?
Anything I can look for/test?
Also note that this kernel has lots of [rendering] problems
with other applications. For example, if I run the new Gstreamer-1.0
based "media player" to play a video, it will bring up the window but
not render any video frames or sometimes render a few and then freeze.
Can you try with the pre-built image here?
http://boundarydevices.com/i-mx6-kernel-3-10-53/
We didn't see any issues, but mostly ran things from the command-line
and the pre-built Vivante demos to test graphics.
Just tried this on my SabreLite.
Chrome - fails just like on my board as reported above
media player (gst-play-1.0) - thinks it's running, but no video
Also, I don't have any audio, neither analog or HDMI
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
