Hi Luo,
Thank you. Can you share the board revision?
The board revision I have tried is :
Board: P3041DS, Sys ID: 0x1c, Sys Ver: 0x12, FPGA Ver: 0x05, vBank: 0
U-Boot 2011.06-rc2 (Jun 09 2011 - 20:15:17)
And the HDD used is:
SATA device 1: Model: Hitachi HDS721050CLA362 Firm: JP2OA3MA Ser#:
JP1511HJ3TTD0K
Type: Hard Disk
Supports 48-bit addressing
Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
Regards,
Siva Borra.
On 2015-05-25 12:55, Luo Zhenhua wrote:
Hello Siva,
I tried the dizzy branch to build images and boot p3041ds board (uImage, dtb,
core-image-mininal.rootfs.ext2.gz.u-boot), the SATA is launched normally.
Layers commit:
Poky - dizzy:9c4ff467f66428488b1cd9798066a8cb5d6b4c3b
meta-openembedded - dizzy:5b6f39ce325d490fc382d5d59c5b8b9d5fa38b38
meta-fsl-ppc - dizzy:5eeeb3ad74b72d904f805bc6e248e93e722b45c4
The full boot log is attached.
Best Regards,
Zhenhua
-----Original Message-----
From: [email protected] [mailto:meta-freescale-
[email protected]] On Behalf Of Siva Borra
Sent: Friday, May 22, 2015 4:26 PM
To: [email protected]
Cc: Adrian Dudau
Subject: [meta-freescale] P3041DS: SATA SCSI disk gives errors
Hello,
With latest dizzy branch of meta-fsl-ppc, with revision (linux-qoriq_3.12.bb and
linux-qoriq_3.12-prt.bb, Linux SRCREV =
"6619b8b55796cdf0cec04b66a71288edd3057229")
Instead of recognizing the HDD attached at SATA, it gives the following errors.
[ 2.153541] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 6.800430]
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 7.822380] ata2.00:
failed
to IDENTIFY (I/O error, err_mask=0x1) [ 11.966438] ata1.00: failed to IDENTIFY
(I/O error, err_mask=0x1) [ 13.489386] ata2.00: failed to IDENTIFY (I/O error,
err_mask=0x1)
Same feature works fine with 3.0.xx kernel supplied with board. Please suggest
how to fix this issue?
Regards,
Siva Borra.
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
