Hi Andreas, I asked Kontron to contribute to the community. Unfortunately they didn't until today. Poor.
I'll try to give you a little help from my documentation. Do the following from scratch: # to install the repo tool (and a bunch of other software) under Ubuntu # 12.04 or 14.04 $ sudo apt-get install phablet-tools $ mkdir fsl-community-bsp; cd fsl-community-bsp $ repo init -u https://github.com/Freescale/fslcommunity-bsp-platform \ -b daisy # The Kontron BSP is based on daisy. I also tried dizzy successfully. # pull the sources $ repo sync # apply the Kontron Patch for SMARC-sAMX6i $ cd sources/meta-fsl-arm-extra $ patch -p1 < /path/to/smarc-samx6i-support-R01.00.diff # initialise Yocto Build Environment $ cd ~/fsl-community-bsp $ MACHINE=smarc-samx6i . ./setup-environment [build-directory] # start Yocto Build $ bitbake core-image-full-cmdline I also tried "core-image-sato" successfully. Interesting, if you have connected a LVDS display. To flash the Yocto image to the board, use the live media of the Linaro based BSP (Linux_BSP_SMX6 1.2): http://emdcustomersection.kontron.com/wp-content/plugins/download-monitor/download.php?id=1164 Good luck Dirk Otavio Salvador schrieb: > On Wed, Jul 8, 2015 at 11:00 AM, Andreas Enbacka > <[email protected]> wrote: >> I am currently trying to build a Yocto image for the SMARC-sAMX6i (SMARC >> evaluation kit from Kontron), and have some questions regarding it. First, >> what reference image recipe is suitable for the SMARC-sAMX6i eval kit? And >> second, what is the optimal way to deploy / flash the Yocto image to the >> board? Any information would be greately appreciated. > > Kontron is not supported by the FSL Community BSP so the right place > to ask for help is their support channel. Plus, pester them to add > proper support to the community so your turn-key experience will be > nicer next time ;) > -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
