Use the following machine specific variables which are defined in machine conf file: * UBOOT_SOURCE_NAND * UBOOT_SOURCE_SPI * UBOOT_SOURCE_SD
Signed-off-by: Zhenhua Luo <[email protected]> --- recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb b/recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb index 2ab2e13..44480b9 100644 --- a/recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb +++ b/recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb @@ -80,30 +80,12 @@ do_compile_append_qoriq-ppc() { cp ${S}/${board}/${UBOOT_SOURCE} ${S}/${board}/${UBOOT_TARGET}.bin elif [ "x${UBOOT_TARGET}" != "x" ]; then # some boards' final binary was not named as u-boot.bin - if [ "${UBOOT_TARGET}" = "u-boot-nand" ];then - if echo $board |egrep -q "^(BSC|C29|P10|P2020RDB)";then - UBOOT_SOURCE=u-boot-with-spl.bin - elif echo $board |egrep -q "^(B4|T1|T2|T4)";then - UBOOT_SOURCE=u-boot-with-spl-pbl.bin - elif echo $board |egrep -q "^(P2041|P3|P4|P5)";then - UBOOT_SOURCE=u-boot.pbl - fi - elif [ "${UBOOT_TARGET}" = "u-boot-spi" ];then - if echo $board |egrep -q "^(P10|P2020RDB)";then - UBOOT_SOURCE=u-boot-with-spl.bin - elif echo $board |egrep -q "^(T1|T2)";then - UBOOT_SOURCE=u-boot-with-spl-pbl.bin - elif echo $board |egrep -q "^(B4|P2041|P3|P4|P5|T4)";then - UBOOT_SOURCE=u-boot.pbl - fi - elif [ "${UBOOT_TARGET}" = "u-boot-sd" ];then - if echo $board |egrep -q "^(P10|P2020RDB)";then - UBOOT_SOURCE=u-boot-with-spl.bin - elif echo $board |egrep -q "^(B4|T1|T2|T4)";then - UBOOT_SOURCE=u-boot-with-spl-pbl.bin - elif echo $board |egrep -q "^(P2041|P3|P4|P5)";then - UBOOT_SOURCE=u-boot.pbl - fi + if [ "${UBOOT_TARGET}" = "u-boot-nand" ] && [ "${UBOOT_SOURCE_NAND}" != "" ]; then + UBOOT_SOURCE="${UBOOT_SOURCE_NAND}" + elif [ "${UBOOT_TARGET}" = "u-boot-spi" ] && [ "${UBOOT_SOURCE_SPI}" != "" ]; then + UBOOT_SOURCE="${UBOOT_SOURCE_SPI}" + elif [ "${UBOOT_TARGET}" = "u-boot-sd" ] && [ "${UBOOT_SOURCE_SD}" != "" ]; then + UBOOT_SOURCE="${UBOOT_SOURCE_SD}" fi cp ${S}/${board}/${UBOOT_SOURCE} ${S}/${board}/${UBOOT_TARGET}.bin -- 2.4.3 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
