The tar.bz2 is useful for people using NFS or generating the SD card image byhand, those can enable this in the board file or in the local.conf when needed. By the fault the SD card image should be the only image built as it is the most commonly used one for initial development.
Signed-off-by: Otavio Salvador <[email protected]> --- Changes in v2: None conf/machine/include/imx-base.inc | 2 +- conf/machine/include/mxs-base.inc | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/conf/machine/include/imx-base.inc b/conf/machine/include/imx-base.inc index e0a67c7..799067d 100644 --- a/conf/machine/include/imx-base.inc +++ b/conf/machine/include/imx-base.inc @@ -139,7 +139,7 @@ IMX_DEFAULT_KERNEL_mx6ul = "linux-imx" PREFERRED_PROVIDER_virtual/kernel ??= "${IMX_DEFAULT_KERNEL}" SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3" -IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard" +IMAGE_FSTYPES ?= "ext3 sdcard" SERIAL_CONSOLE = "115200 ttymxc0" diff --git a/conf/machine/include/mxs-base.inc b/conf/machine/include/mxs-base.inc index b32e926..38450be 100644 --- a/conf/machine/include/mxs-base.inc +++ b/conf/machine/include/mxs-base.inc @@ -36,7 +36,7 @@ SERIAL_CONSOLE = "115200 ttyAMA0" KERNEL_IMAGETYPE = "zImage" SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3" -IMAGE_FSTYPES ?= "tar.bz2 ext3 uboot.mxsboot-sdcard sdcard" +IMAGE_FSTYPES ?= "ext3 uboot.mxsboot-sdcard sdcard" # Add the ability to specify _imx machines MACHINEOVERRIDES =. "imx:" -- 2.5.3 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
