Hello Bob, On Tue, Oct 20, 2015 at 6:24 PM, Bob Cochran <[email protected]> wrote: > I just tested this using the linux-qoriq recipe in the meta-freescale repo @ > https://github.com/Freescale/meta-freescale.git > > Booted OK on my rev2.0 TWR board, and I can do basic things like ping and > access my SD card. > > Boot hung on my rev1.0 TWR board ( @ Starting kernel... ). > > > Is this as expected? I'm not clear yet on what's needed to boot a 1.0 SoC > vs. a 2.0 SoC. However, please note that the ls1021atwr.conf file specifies > that the layer works with the rev1.0 TWR boards, which doesn't seem to be > the case. > > It would be good to straighten out the 1.0 vs. 2.0 issues. I assume it > could be handled with some customization of .config and dts files? Any > guidance will be appreciated.
Agreed; it needs to be fixed. I am adding the QorIQ people on Cc as Daiane is not involved directly on its development. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
