Have you updated the u-boot on the board? We wrote a blog about it: https://boundarydevices.com/compiling-latest-u-boot-for-i-mx6-2015-edition/
3.14 kernel requires the new bootscript for our boards. The new bootscript also requires the new u-boot to be installed on the board. I would have sworn I made a note of this in the patches I sent in, but it appears I forgot to mention that. On Fri, Nov 6, 2015 at 11:27 AM, Otavio Salvador < [email protected]> wrote: > On Fri, Nov 6, 2015 at 4:11 PM, Ian Coolidge <[email protected]> > wrote: > > The current setup is actually correct. It's a bit cryptic in the path > used, > > implying it only works on the nitrogen6x board. However, our bootscript > is > > universal across all our boards now and will work, assuming you have the > > latest u-boot installed. > > > > I also just tripled checked core-image-sato against the nitrogen6x-lite > > board, the bootscript is handling as it should. > > > > Maybe we could add a comment there mentioning the universal nature of the > > bootscript? > > On the Nitrogen Lite we have, it did not work at all. It seems it does > not find out the board to use when loading the device tree file. > Remember we are using the 3.14 kernel. > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://code.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 >
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
